GE 49-60468-1 1/4″ FRAMED PANEL DIMENSIONS, 3/4″ OVERLAY PANEL DIMENSIONS, Design Guide

Design Guide

1/4″ FRAMED PANEL DIMENSIONS					5/16"
If you choose to install framed panels, they must be cut	Door				Trim
				Reveal
to the dimensions shown. The panels will slide into the
frame on the door, drawer and grille.
If the custom panel is less than 1/4″ thick and if it fits		1/4"
loosely in the door frame, it can be backed up with a			Panel
piece of filler material or foam tape to improve the fit.

							IMPORTANT NOTE: Maximum total
							panel weight:
							• Fresh food door panel – 58 lbs.
							• Freezer drawer panel – 28 lbs.
	A		Framed Panel Dimensions				• Grille Panel – 11 lbs.
Grille Panel
		B
					A (Width)	B (Grille Height)		C (FF Height)	D (FZ Height)
				1/4″ Framed Panel	33-7/8″	8-7/8″		46-1/16″	21-7/8″
Fresh Food
		C
Panel			Overlay Panel Dimensions
					A (Width)	B (Grille Height)		C (FF Height)	D (FZ Height)

Freezer Drawer

Panel

D

1/4″ Backer Panel	33-7/8″	8-7/8″	46-1/16″	21-7/8″
0.10″ Spacer Panel	32-1/2″	7-5/8″	44-11/16″	20-1/2″
3/4″ Overlay Panel	34-1/8″	9″	46-5/16″	22″

3/4″ OVERLAY PANEL DIMENSIONS

For a more custom appearance, overlay panels may be installed on trimmed models. The overlay panel must be secured to a 1/4″ thick backer panel which slides into the trim. A spacer panel 0.10″ thick must be placed between the overlay and backer panel.

Assemble the panels with glue and screws.

•Center the spacer panel on the backer panel, left to right and top to bottom. Secure the panels with glue.

•Center the spacer and backer panel on the overlay panel and secure with glue and screws. Screws must be countersunk into the backer panel.

Door/Drawer

1/4"

Backer

Panel

Overlay

Panel

.10 Inch

Spacer

Overlay Panel

Spacer Panel

Backer Panel

IMPORTANT NOTE: Maximum total weight for the assembled panels:

•Fresh food door panel – 58 lbs.

•Freezer drawer panel – 28 lbs.

•Grille Panel – 11 lbs.

NOTE: Left-to-right offset is not always equal to top-to-bottom offset.

7