IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock, or to prevent property damage, personal injury, or loss of life.

WARNING ANTI-TIP DEVICE

All ranges can tip and injury could result.

To prevent accidental tipping of the range, attach it to the wall and floor by installing the Anti-Tip device supplied.

To check if the device is installed and engaged properly, remove the kick panel or storage drawer and inspect the rear leveling leg. Make sure it fits securely into the slot.

If you pull the range out from the wall for any reason, make sure the device is properly engaged when you push the range back against the wall. If it is not, there is a possible risk of the range tipping over and causing injury if you or a child stand, sit or lean on an open door.

Please refer to the Anti-Tip device information in this manual. Failure to take this precaution could result in tipping of the range and injury.

IMPORTANT SAFETY NOTICE

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

The fiberglass insulation in self-clean ovens gives off a very small amount of carbon monoxide during the cleaning cycle. Exposure can be minimized by venting with an open window or using a ventilation fan or hood.

Fluorescent light bulbs contain mercury. If your model has a surface light, you must recycle the fluorescent light bulb according to local, state and federal codes.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■Be sure your appliance is properly installed and grounded by a qualified installer in accordance with the provided installation instructions.

■Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.

■Do not attempt to repair or replace any part of your range unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

■Before performing any service, disconnect the range power supply at the household distribution panel by removing the fuse or switching off the circuit breaker.

■Do not leave children alone—children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

■Do not allow anyone to climb, stand or hang on the door, storage drawer or cooktop. They could damage the range and even tip it over, causing severe personal injury.

3

Tips Customer Service

Page 2 Page 4
Page 3
Image 3
GE 164D3333P200-3, 49-8973-2 01-00 JR manual Tips Customer Service, All ranges can tip and injury could result
Page 2 Page 4

164D3333P200-3, 49-8973-2 01-00 JR specifications

The GE 49-8973-2 01-00 JR,164D3333P200-3 is a cutting-edge industrial product from General Electric, known for its robust design and innovative technologies. This equipment is part of GE's broader portfolio, which is recognized globally for its reliability and performance across various sectors.

One of the main features of this model is its advanced control system, which ensures precise operation in demanding environments. This control system is complemented by an integrated monitoring solution that provides real-time data on performance metrics, enabling proactive maintenance and minimizing downtime.

The GE 49-8973-2 utilizes high-grade materials engineered to withstand extreme conditions. This characteristic is crucial for sectors like aerospace and energy, where equipment must endure high stress and temperature variations. The quality of construction not only enhances durability but also contributes to the overall efficiency of the system.

In terms of technology, this model is equipped with state-of-the-art sensors that offer comprehensive data analytics capabilities. These sensors help in monitoring operational parameters such as temperature, pressure, and vibration, thus facilitating effective decision-making processes. Users benefit from enhanced operational insights, allowing for more informed strategies regarding maintenance and performance optimization.

Another remarkable aspect of the GE 49-8973-2 is its energy efficiency. The system is designed to minimize energy consumption while maximizing output. This focus on sustainability aligns with global industry trends toward reducing carbon footprints and operational costs.

The GE 49-8973-2 also incorporates flexible modular architecture, which allows for easy upgrades and scalability. This feature is particularly beneficial for companies looking to expand their operations without the necessity of overhauling existing equipment.

Safety is a paramount consideration in the design of the GE 49-8973-2, featuring multiple fail-safes and emergency shutdown protocols to protect users and assets. These safety measures ensure compliance with international industry standards and make the unit suitable for high-risk environments.

In conclusion, the GE 49-8973-2 01-00 JR,164D3333P200-3 stands out due to its innovative control systems, durable materials, advanced sensor technologies, energy efficiency, and emphasis on safety. These characteristics make it an invaluable asset for industries demanding reliability and high performance, ensuring it remains at the forefront of industrial solutions.
Top Page Image Contents