GE 600 - 1500 VA manual NetPro

g

GE Digital Energy

GB

USER MANUAL

NetPro 19"

Uninterruptible Power Supply

600 - 1500 VA

Please read these instructions carefully before installation and start-up of the NetPro 19” UPS. Keep this manual in a safe place for future reference.

		CONTENTS
1	INTRODUCTION		2
	1.1	Introduction
	1.2	Safety Rules
	1.3	Transport / Storage
2	INSTALLATION		2
	2.1	Installation Rules
	2.2	Installation Procedure
3	OPERATION		4
	3.1	Start-up
		3.1.1 Start-up, mains available
	3.2	3.1.2 Start-up, mains not available (‘battery start’)
		Use: Normal Operation
		3.2.1 Normal operation conditions
		3.2.2 Load indication
		3.2.3 Auto-off (no-load shutdown)
		3.2.4 Automatic bypass switch
	3.3	3.2.5 Switching off
		Use: Status and Alarm Indications
		3.3.1 Charger on
		3.3.2 On-line: normal operation
		3.3.3 On battery
		3.3.4 Battery low (end of runtime)
		3.3.5 On bypass
		3.3.6 Bypass out of limits
		3.3.7 Overload
		3.3.8 Overtemperature
		3.3.9 Replace battery
		3.3.10 Programmed shutdown
	3.4 Use: Setup Mode
	3.5 Battery Management
4	COMMUNICATION		9
	4.1 RS232 Port
	4.2	Relay Interface Card (option)
	4.3	SNMP Interface Card (option)
5	OPTIONAL FEATURES		10
	5.1	Extended Runtime (NetPro 19” 1000)
	5.2 PowerFLAG SerVICe Box for Modem Connection
6	MAINTENANCE		10
	6.1	General
	6.2	Batteries
		6.2.1 General
		6.2.2 Battery Replacement
7	TROUBLESHOOTING		12
8	SPECIFICATIONS		13

© GE Digital Energy. All rights reserved; reproduction in whole or in parts without permission is prohibited. This manual may be subject to change; no liability can be accepted for any error or omission.

OPM_NPE_19X_600_1K5_2GB_V030 1 GE DE NetPro 19” 600-1500: User manual 3.0 (GB)