GE 600 - 1500 VA manual Communication, RS232 Port fig, Relay Interface Card option

g

GE Digital Energy

4 - Communication

4.1RS232 Port (fig. 8)

The RS 232 Port is a plug-in interface port (9-pin, Sub-D, male) which enables advanced communication between the UPS and the computer (UPS software required). The interface port is operative as soon as the mains power cord is plugged into a live wall outlet, even if the UPS is switched off.

We strongly recommend to use only original GE Digital Energy software products in combination with the interface port.

Pin #	Function	fig. 8
1	RS232 input (UPS shutdown)
2	RS232 output
3	General alarm1)
4	Plug and Play
5	Common
6	Bypass active
7	Battery low
8	UPS connected
9	Mains failure

1) Active if the output voltage of the UPS is no longer guaranteed due to other circumstances than already indicated by pin 6-7-9:

- Output converter overload

- Overtemperature (pre-)alarm - High charger voltage

- Bypass out of limits

- Inverter shutdown (due to inverter failure or batt. failure)

5 = COMMON

8 = UPS CONNECTED

MAINS FAILURE
	DC		5
PnP			9
	RS232
			4
GENERAL ALARM			8
			3
BATTERY LOW			7
			2
			6
BYPASS ACTIVE			1
DATA FROM		DC	RS232
UPS		RS232	PORT
DATA TO UPS		DC
REMOTE UPS		RS232
SHUT DOWN
MAX: +48V 100mA

4.2Relay Interface Card (option)

The card is equipped with potential free change-over contacts for the following alarms:

•mains failure

•general alarm

•battery low

•bypass active

For more information please refer to the user manual that comes with the interface card.

4.3SNMP Interface Card (option)

This card allows the data interface to be connected directly to an Ethernet network.

For more information please refer to the user manual that comes with the interface card.

OPM_NPE_19X_600_1K5_2GB_V030 9 GE DE NetPro 19” 600-1500: User manual 3.0 (GB)