g
GE Digital Energy
Battery replacement procedure
Refer to the label on the battery drawer.
1.Be sure that the transport screws (A, fig. 1) have
been removed.
2. Remove the front panel of the battery compartment. Use a screw driver or pen as a lever.
3. Remove the two screws that hold the battery drawer.
4.Disconnect the DC connectors. Use a screwdriver as a lever.
5.Remove battery drawer. Be careful, heavy weight!
6. Remove clamp (two screws) and replace the batteries.
7. Reinstall battery clamp, do not pinch or clamp the wires.
8.Slide in the battery drawer.
9. Connect the DC connectors, a small spark is normal. Fasten the two screws.
10. Reinstall the front panel.
fig. 9
OPM_NPE_19X_600_1K5_2GB_V030 | 11 | GE DE NetPro 19” |
