Getting Started
Thank you for purchasing this Panasonic digital cellular phone. This phone is
designed to operate on the Global System for Mobile Communications (GSM),
GSM900 or GSM1800. Ensure the battery is fully charged before use.
Beforeoperating this phone please read the “Important Information” section -
see page54.
Theseoperating instructions detail use of the equipment contained in the Main Kit.
Someservices detailed herein are network dependent or may only be available on a
subscriptionbasis. Some functions are SIM dependent. For more information contact
your Service Provider.

Fitting the SIM

TheSIM is inserted into the back of the
phone underneath the battery.
Place the SIM in the recess at the rear
of the phone (1) ensuring the bevelled
corner is positioned in the top right
corner.Slide the SIM to the left (2) using
lightpressure until it is located under the
lugs and the SIM retaining clip has
clicked into position (3).
Removing the SIM
Ensurethe SIM retaining clip is pressed
down (1) and while holding this down
slidethe SIM to the right (2). Once clear
of the lugs the SIM can be lifted out of
the recess.

Fitting the Battery

Fit a fully charged battery pack. If the
battery pack is not fully charged then it
must be charged as described in the
“Charging the Battery” section.
Locate the top of the battery into the
rear of the phone (1). Push the bottom
of the battery into place until it locks into position (2).
1
Getting Started