Personalising Your Phone
4When ready, hold the phone approximately 7” (178mm) from your mouth, press B and speak clearly into the microphone to record the name of the selected Phonebook entry
When the recording has stopped, you will be prompted to repeat the name
5Press B and repeat the name
Once recording is complete for a second time, the display will indicate if the recording was successful or not. If unsuccessful, repeat from step 4.
Dialling Using Voice Command
From Idle mode press and hold the navigation key (g) in any one of the four directions a, b, cor d. Speak clearly the name you wish to dial (exactly as recorded) and wait
The above procedure will recall the phone number and the requested Voice Dial is repeated; to initiate the call press D.
Editing the Voice Commands
You can add, play or delete any of the Voice Dial commands. With a Voice Dial entry displayed:
Use fto cycle through Add, Play or Delete and press Bto select an option
Add
To record the voice command again
Play
To listen to your recording
Delete
To delete an entry
Selecting Vibration Alert Type
The vibration alert facility may be set to vibrate continuously or intermittently.
1From Idle mode press B 55 to enter the Vibration Alert menu
2Use e to select the type of vibration desired and press B
Changing the Language
It is possible to change the language that the phone uses for either the display messages and/or for text entry.
1From Idle mode press B 51 to enter the Language menu
2Use e to select DisplayLanguage or Tegic Language (text entry) that you wish to change and press B
3Use e to select the desired language and press B
19
