Installation Instructions
1WINDOW REQUIREMENTS
•These instructions are for a standard
•The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions.
•All supporting parts must be secured to firm wood, masonry or metal.
•The electrical outlet must be within reach of the power cord.
12″ min.
26″ to 393⁄8″
(With accordion panels)
22″ min.
(Without accordion panels)
2STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.
To adjust for this, attach a piece of wood to the stool.
WOOD PIECES–
WIDTH: 2″
LENGTH: Long enough to fit inside the window frame.
THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame.
Attach securely with nails or screws provided by the installer.
Wood
1/2″ higher |
|
than frame | Stool |
|
Storm window frame
3PREPARE THE WINDOW
ACut the window sash seal to the window width and stick the adhesive side to the bottom of the sash.
Window
sash seal
INSIDE
BMark the centerline of the sill. Measure
and mark the location for the support bracket 1″ to the left of the centerline.
Sill
OUTSIDE
L | INSIDE |
C |
|
Center line
1″ left of center line
Stool
4PREPARE THE AIR CONDITIONER
Insert the frames for the accordion panels into the bottom mounting rail and the top frame guides. Attach the accordion panels to the side of the case by pressing them onto the mounting tabs.
9
