Manuals / GE / Household Appliance / Air Conditioner

GE AGL24, AGQ24, AGV24, AGW24 8INSTALL THE AIR CONDITIONER IN THE CASE, Installation Instructions

Models: AGL24 AGL18 AGW24 AGV24 AGQ24

1 40
Download 40 pages 58.79 Kb
Page 14
Image 14
8INSTALL THE AIR CONDITIONER IN THE CASE

Installation Instructions

7INSTALL A SUPPORT BRACKET AND THE FOAM TOP WINDOW GASKET

AAttachscrew. a support bracket with a Type C

BCut the foam top window gasket to the window width.

CStuff the foam between the glass and the window to prevent air and insects from getting into the room.

8INSTALL THE AIR CONDITIONER IN THE CASE

ASlide the air conditioner into the case. Reinstall the 2 screws removed earlier on each side of the case.

BBefore installing the front grille, pull out the vent control lever located above the unit control knobs, as shown.

CAttach the front grille to the case by inserting the tabs on the grille into the slots on the front of the case. Push the grille in until it snaps into place.

Guide the lever carefully through the grille as you push it in.

DLift the inlet grille and secure the front frame with a type A screw through the front grille. Lower the inlet grille back into place.

14

Page 13 Page 15
Page 14
Image 14
GE AGL24, AGQ24, AGV24, AGW24, AGL18 8INSTALL THE AIR CONDITIONER IN THE CASE, Installation Instructions
Page 13 Page 15

FAQ

How do I install a support bracket and foam top window gasket?

To install a support bracket, attach a screw and cut the foam top window gasket to the window width. Then, stuff the foam between the glass and the window to prevent air and insects from getting into the room.

How do I install the air conditioner in the case?

To install the air conditioner in the case, slide it in and reinstall the 2 screws on each side. Then, attach the front grille by inserting the tabs into the slots and guide the vent control lever through.

How do I secure the front frame and inlet grille?

To secure the front frame, lift the inlet grille and use a type A screw through the front grille. Then, lower the inlet grille back into place.

What is the best way to attach the front grille?

The best way to attach the front grille is by inserting the tabs on the grille into the slots on the front of the case and pushing it in until it snaps into place.