Manuals / GE / Kitchen Appliance / Oven

GE PCS, ECS, ECD, MCD, MCS, PCD Before You Call For Service, Oven Failure Codes, Clock Display, Cause

Models: PCD MCS MCD ECD PCS ECS

1 24

Download 24 pages 50.35 Kb

Page 19

Image 19

Before You Call For Service

IMPORTANT:

If a failure code is displayed, the oven will beep continuously until the user presses the CANCEL • SECURE key. The oven will not heat after a failure code is displayed. Call a qualified appliance technician to repair the oven.

Clock Display

Cause

F0.

F1.

F2.

F3.

F4.

F6.

F8.

Touch pad is stuck in depressed position.

Relay circuit failure.

Oven temperature exceeded the clean runaway temperature (self-clean mode only) or the cooking runaway temperature (cooking modes only).

Short circuit in the oven temperature sensor.

Open circuit in the oven temperature sensor.

Failure in the EEPROM check comparison. (Only time of day and timer will operate.)

Failure of the self-clean automatic door latch circuit.

Failure of the door latch motor. Occurs when the motor runs for two minutes without the door locking in self-clean mode.

Oven Failure Codes

Page 19

Image 19

GE PCS, ECS, ECD, MCD, MCS, PCD manual Before You Call For Service, Oven Failure Codes, Clock Display, Cause

Contents

Part No. 65031 Rev. J USE AND CARE MANUAL CLASSIC WALL OVENTa b l e o f C o n t e n t s Place Serial Number Label HerePage READ AND SAVE These Instructions Important Information About Safety InstructionsSafety Symbols and Labels For service and warranty information, see pageImportant Safety Instructions General Safety Precautions Getting Started Setting The Time Of DayOven Features Oven OperationControl Panel - Millennia Models MCD227 and MCD230 Control Panel - Epicure Models ECD227 and ECD230Control Panel - Epicure Models ECS227 and ECS230 Control Panel - Epicure Models ECS127, ECS130 and ECS136Control Panel - Preference Model PCS230 Oven OperationControl Panel - Millennia Models MCS127 and MCS130 Control Panel - Preference Models PCD227 and PCD230Oven Rack Positions GlideRack Oven Rack InstallationInstallation Helpful Hints When Using Your GlideRack Oven RackPre-Heating the Oven AIR FLOW Heated Air Circulation in Convection ModesClock Displaying Broil double oven Bakeware TipsPROBABLE CAUSE PROBLEMTo operate the oven in standard broil or convection broil modes 2. Press the BROIL or CONVECTION BROIL keyImportant things to know about the meat probe Setting the Oven for Delay Timed CookingProbe Placement Meat ProbeType and Cut To use the minute timerSetting the Oven When Using the Temperature Probe Minimum Safe Internal Temperatures for Various FoodsCare and To Prepare the Oven for Self-Cleaning Care and CleaningSelf-Cleaning Convection Filter InstallationSelf-Cleaning Tips Care and Self-Cleaning ContinuedCleaning Adjusting the Oven Temperature Display When Calibrating the OvenTo replace a light bulb, follow these steps Oven Light AssemblyReplacement Oven Light Bulb Stainless Steel Cleanersection see Care and Cleaning PROBLEMPOSSIBLE SOLUTION Adjusting the Oven TemperatureCause Before You Call For ServiceOven Failure Codes Clock DisplayWhat Is Covered Service and Product WarrantyProduct Maintenance If You Need ServicePage Page PO BOX DIAMOND BAR CA ATTN WARRANTY PROCESSING DEPT 1440 BRIDGE GATE DR STEBUSINESS REPLY MAIL DACOR INC B WARRANTY INFORMATION A  F