GE JGBP29 Oven Shelves, Oven Light Replacement, Consumer Support, Operating, Care and Cleaning

Models: JGBP32 JGBP28 JGBP29 JGBP33 EGR2002 EGR2001

1 56
Download 56 pages 20.29 Kb
Page 33
Image 33
Oven Shelves

 

 

ge.com

 

 

 

 

Oven Shelves

 

 

 

 

Clean the shelves with an abrasive cleanser

If the shelves ever become hard to slide,

 

or scouring pad. After cleaning, rinse the

wipe the shelf edges or oven shelf supports

 

 

shelves with clean water and dry with a

with vegetable oil.

 

clean cloth.

NOTE: Take the shelves out of the oven before you

 

 

 

 

begin the self-clean cycle or they may discolor.

Safety Instructions

 

Wire cover holder.

Oven Light Replacement

Oven Light ReplacementCAUTION: Before replacing your oven light bulb, disconnect the electrical power to the range at the main fuse or circuit breaker panel. Be sure to let the light cover and bulb cool completely.

The oven light bulb is covered with a removable glass cover that is held in place with a bail-shaped wire. Remove the oven door, if desired, to reach cover easily.

To remove:

Hold a hand under the cover so it doesn’t fall when released. With fingers of the same hand, firmly push back the wire cover holder. Lift off the cover.

Do not remove any screws to remove the cover.

Do not touch hot bulb with a wet cloth. Replace bulb with a 40-watt household appliance bulb.

To replace cover:

Place it into the groove of the light receptacle. Pull the wire forward to the center of the cover until it snaps into place. When in place, the wire holds the cover firmly. Be certain the wire

is in the depression in the center of the cover.

Connect electrical power to the range.

Instructions

Operating

 

Care and Cleaning

 

 

Instructions

Installation

 

Troubleshooting Tips

 

 

33

Consumer Support

Page 33
Image 33
GE JGBP29 Oven Shelves, Oven Light Replacement, Consumer Support, Operating, Care and Cleaning, Installation, Instructions