www.GEAppliances.com
OVEN CONTROL, CLOCK AND TIMER
Automatic Clock | To Set the Clock | ||
The clock must be set for the automatic oven timing | 1. | Press the CLOCK pad. | |
functions to work properly. The time of day cannot be | 2. | Press the HOUR and MIN. pads to set | |
changed during a Timed Baking or | |||
the time of day. | |||
| |||
|
|
| |
Features of
Timer
The timer is a minute timer only.
The timer does not control oven operations. The maximum setting on the timer is 11 hours and
59 minutes.
To Set the Timer
1.Press the TIMER
ON/OFF pad.
2.Press the HOUR and MIN. pads until the amount of time you want shows in the display. The timer will start automatically within a few seconds of releasing the pad.
To Reset the Timer
If the display is still showing the time remaining, you may change it by pressing the HOUR and MIN. pads until the time you want appears in the display.
If the remaining time is not in the display, recall the remaining time by pressing the TIMER ON/OFF pad and then pressing the HOUR and MIN. pads until the new time you want shows on the display.
Your Oven Control
To Cancel the Timer | End of Cycle Tones (on some models) |
To cancel the timer, the remaining time must be in | The end of cycle tone can be cleared by pressing |
the display. To recall the time remaining, press the | the TIMER ON/OFF pad or, on some models, |
TIMER ON/OFF pad once. To cancel the timer press | by pressing the COOK TIME ON/OFF pad |
the TIMER ON/OFF pad again. | depending on which function you are using. |
|
|
Power Outage
On some models, after a power outage the oven will automatically resume its setting once the power is restored.
For models with a CLOCK pad, when the power is restored the display will flash the time of day until a pad is pressed or the knob is turned. Reset the clock to the correct time of day.
If the oven was in operation when the power outage occurred, the Oven Set knob must be turned back to OFF. Then reset the knob to the way it was before the power outage.
If your model has a COOK TIME ON/OFF pad and your oven was set for timed baking or roasting when the power outage occurred, the clock and all programmed functions must be reset. To reset them, first turn the Oven Set knob back to OFF, reset the clock, functions and knob back to the way they were before the power outage.
Oven Set Knob
The Oven Set knob maintains the temperature you set from WARM (170°F.) to BROIL (550°F.).
It also has an OFF and a CLEAN setting.
Appearance may vary.
The PREHEATED light glows when the oven reaches your selected temperature.
The OVEN ON light will glow any time the Oven Set knob is not in the OFF position and is set on a temperature or a function.
Oven Control, Clock and Timer
11
