GE GARF19XXYK, ED5KVEXVQ manual About the controls on the refrigerator, Is Coldest

About the controls on the refrigerator.

Your controls will look like one of the following:

FREEZER

4 5 6

3

2 1

0

7

8

9

REFRIGERATOR

4	5	6
3		7
2		8
1		9

0 IS OFF

9 IS COLDEST

9 IS0COLDESTIS OFF

Startup Steps for Proper Temperature Control	NOTE: Turning the refrigerator to the 0 (off) setting via the controls does
STEP 1—Set Fresh Food Control on “5.”	not shut off electrical power to the refrigerator.

STEP 2—Set Freezer Control on “5.”

STEP 3—WAIT 12 HOURS for temperature to stabilize.

STEP 4—If a change is needed, move the control one number at a time and allow 12 hours for temperature to stabilize.

To Change Temperature Control Setting with Touch Pads:

•Freezer setting is on the left side of the display.

•Refrigerator setting is on the right side of the display.

—Press the Warmer or Colder pad for compartment and direction desired.

—Present control setting number will illuminate.

—Each time the pad is touched, compartment setting changes one number.

A display of 1 is warmest and 9 is the coldest setting.

The temperature controls are preset in the factory at 37°F for the refrigerator compartment and 0°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.

The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment.

Control settings will vary based on personal preferences, usage

and operating conditions and may require more than one adjustment.

To Turn Cooling Off:

To stop cooling in the refrigerator and freezer compartments, first repeatedly press the Warmer pad for the freezer until its display continuously flashes “1”. Then, using the refrigerator control, repeatedly press Warmer until both displays flash “0”. “0” in both displays turns off the cooling system. On some models, it may be necessary to set only one control to 0 to turn off cooling in both compartments.

NOTE: Turning the refrigerator to the 0 (off) setting via the controls does not shut off electrical power to the refrigerator.

Control settings will vary based on personal preferences, usage

and operating conditions and may require more than one adjustment.

Setting either or both controls to OFF stops cooling in both the freezer and refrigerator compartments, but does not shut off electrical power to the refrigerator.

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.

6