IMPORTANT SAFETY INFORMATION.

5($'$//,16758&7,216%()25(86,1*³

SAVE THESE INSTRUCTIONS

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, electric shock, and to prevent property damage, personal injury, or death.

WARNING! WATER HEATER SAFETY

Under certain conditions, hydrogen gas may be produced in a water heater that has not been used for two or more weeks. HYDROGEN GAS IS EXPLOSIVE.

If the hot water has not been used for two or more weeks, prevent the possibility of damage or injury by turning on all hot water faucets and allow them to run for several minutes. Do this before using any electrical appliance connected to the hot water system. This simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not smoke, use an open flame, or use the appliance during this process.

PROPER INSTALLATION AND MAINTENANCE

This dishwasher must be properly installed and located in accordance with the Installation Instructions before it is used. If you did not receive an Installation Instructions sheet with your dishwasher, you can receive one by visiting our website at GEAppliances.com.

„Connect the dishwasher/appliance to a grounded metal, permanent wiring system; or run an equipment-grounding conductor with the circuit conductors and connect to the equipment- grounding terminal or lead of the appliance.

„Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt whether the appliance is properly grounded.

„Dispose of discarded appliances and shipping or packing material properly.

„Do not attempt to repair or replace any part of your dishwasher unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.

„To minimize the possibility of electric shock, disconnect this appliance from the power supply before attempting any maintenance.

NOTE: Turning the dishwasher off does not disconnect the appliance from the power supply. We recommend having a qualified technician service your appliance.

CAUTION: To prevent minor injury or property damage

„ Contents washed in Anti-bacterial mode, if available, may be hot to the touch. Use care before handling.

„ Using a detergent that is not specifically designed for dishwashers will cause the dishwasher to fill with suds.

„ If your dishwasher is connected to a

 

wall switch, ensure that the switch is

 

on prior to use.

 

„ On dishwashers with electronic

 

controls, if you choose to turn the wall

 

switch off between wash cycles, allow

2

5–10 seconds after turning the switch on

before touching ON/OFF to allow the control to

reboot.

„Non-Dishware Items: Do not wash items such as electronic air cleaner filters, furnace filters and paint brushes in your dishwasher. Damage to dishwasher and discoloration or staining of dishwasher may result.

„Close supervision is necessary if this appliance is used by or near children.

„Load light, plastic items so they will not become dislodged and drop to the bottom

of the dishwasher³they might come into contact with the heating element and be damaged.

Page 1 Page 3
Page 2
Image 2
GE GLDT696, GLDT690 owner manual Important Safety Information, $$//,16758&7,216%2586,1*³
Page 1 Page 3

GLDT690, GLDT696 specifications

The GE GLDT696 and GLDT690 are sophisticated gas turbine engines designed for various industrial applications, particularly in power generation and mechanical drive services. Both models represent the culmination of advanced engineering, offering superior performance, reliability, and efficiency to meet the demands of modern energy needs.

The GE GLDT696 is known for its high output and operational flexibility. It features a heavy-duty design that allows it to operate across a wide range of environmental conditions. This turbine is equipped with advanced aerodynamics that enhance airflow and combustion efficiency, resulting in a significant reduction in emissions. With a thermal efficiency of up to 36%, the GLDT696 excels in converting fuel into usable energy, making it an ideal choice for power generation in combined cycle power plants.

On the other hand, the GLDT690, while slightly smaller in capacity, does not compromise on performance. Known for its compact design, this engine is particularly suitable for applications where space is a constraint. The GLDT690 shares many technological advancements with its larger counterpart, including the same high-efficiency combustor and turbine blade designs, which contribute to lower operational costs and emissions.

Both turbines utilize state-of-the-art controls that provide real-time monitoring and optimization of performance variables. The integrated control system allows for seamless operation and enhances reliability, reducing the risk of unplanned downtime. Additionally, both models are designed with modular components, facilitating easier maintenance and quicker turnaround times.

The emissions control technologies utilized in both GE models are noteworthy. They include low-NOx combustion systems and advanced air-fuel mixing techniques, which significantly mitigate the release of harmful pollutants into the atmosphere. This not only helps operators adhere to stringent environmental regulations but also bolsters sustainability efforts in energy production.

Overall, the GE GLDT696 and GLDT690 are exemplary examples of cutting-edge turbine technology. By combining high efficiency, reliability, and advanced emissions controls, these gas turbines stand as a testament to GE's commitment to innovation and environmental responsibility in the pursuit of cleaner energy solutions.
Top Page Image Contents