| www.GEAppliances.com |
Light Bulb Replacement |
|
A | Before replacing a burned out light bulb, |
located behind the light shield next to | unplug the refrigerator. Setting the |
the temperature control. To replace a | control to OFF does not remove power |
to the light circuit. | |
light shield, unscrew the bulb, and screw |
|
in a |
|
Safety Instructions
Beneath and Behind the Refrigerator
•In the refrigeration process, it is normal that heat be expelled in the area under the refrigerator. Some synthetic floor coverings will discolor at these normal and safe operating temperatures. Your floor covering supplier should be consulted if you object to this discoloration.
•Care should be taken in moving your refrigerator away from the wall.
All types of floor coverings can be damaged, particularly cushioned coverings and those with embossed surfaces.
•When pushing the refrigerator back, make sure you don’t roll over the power cord.
Operating Instructions
When You Move
Disconnect the power cord from the wall outlet, remove food and defrost refrigerator. Then clean and dry
the interior.
Secure all loose items such as ice trays and drip tray by taping them securely in place to prevent damage.
Be sure refrigerator stays in upright position during actual moving and in van. Refrigerator must be secured in van to prevent movement. Protect outside of refrigerator with blanket.
Installation Instructions
When You Go on Vacation
For extended vacations or absences, unplug the refrigerator. Clean the interior with a baking soda solution of one tablespoon of soda to one quart of water. Wipe dry. To prevent odors, leave an open box of baking soda in the refrigerator. Leave doors open.
For shorter vacations, remove perishable foods and leave the control at regular setting. However, if room temperature is expected to drop below 40°F, follow the same instructions as for extended vacations.
Troubleshooting Tips Consumer Support
9
