|
| TERMINAL SETUP | |
|
| Installing the Smart Battery | |
Manual Shutdown Hold the red key down for about 4 seconds until the terminal displays the | |||
|
| shutdown verification screen. Keep holding the red key until the Vx670 terminal | |
|
| shuts down. | |
|
|
| |
| NOTE | • The |
|
|
| key is accidentally held down. The time required to hold the red key down to | |
shut down the terminal is configurable (for more information, see the Vx670 Reference Manual – VPN 24004).
• When the terminal has no power, the screen is blank and the green LED indicator is not lit.
Installing the Smart Battery
The Vx670 smart battery fits in a slot on the back of the Vx670 terminal, as shown in Figure 17. The locking tab clicks when the battery is in place. The slot is keyed, so that there is only one way to insert the battery.
Figure 17 Installing the Smart Battery
Removal To remove the Vx670 smart battery, press the locking tab and pull the smart battery from its slot.
Figure 18 Detaching the Smart Battery from the Vx670 Terminal
VX670 INSTALLATION GUIDE | 27 |
