TERMINAL SETUP
Establishing Telephone Line Connections
CAUTION The Modem Dongle and Serial Dongle are intended for use with the Vx670 terminal and Base Station only. They should not be installed or used with any equipment other than the Vx670 terminal or Base Station.
Establishing
Telephone Line
Connections
To connect a telephone line:
1Connect one end of the telephone cord to the USB Modem Dongle.
2Connect the USB Modem Dongle to the terminal using the AVX Connector (VPN
3Route the other end of the telephone cord directly to a telephone wall jack.
WARNING
To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord.
USB HOST CABLE
USB MODEM DONGLE
Figure 7 Vx670 USB Modem Dongle Connection
VX670 INSTALLATION GUIDE | 19 |
