TERMINAL SETUP
Installing/Replacing MSAM Cards
9Tear the paper off against the serrated plastic strip in the printer.
Installing/
Replacing MSAM
Cards
When you first receive your Vx670 terminal, you may need to install one or more MSAM cards or you may need to replace old cards.
| CAUTION | Observe standard precautions when handling electrostatically sensitive devices. | |
|
| Electrostatic discharges can damage this equipment. VeriFone recommends | |
|
| using a grounded | |
|
|
|
|
To Install/Replace | 1 | Power off the terminal. | |
| MSAMs |
|
|
|
|
|
|
| CAUTION |
|
|
|
| It is very important that the terminal is powered off before removing the battery. | |
|
|
|
|
|
| 2 | Place the terminal upside down on a soft, clean surface to protect the lens |
|
|
| from scratches. |
|
| 3 | Remove the battery. |
Figure 13 Removing the Smart Battery
4After removing the battery, the MSAM compartments are exposed.
5Remove any previously installed MSAM card by sliding the card from the MSAM cardholder.
VX670 INSTALLATION GUIDE | 23 |
