VeriFone Vx670 manual Battery Behavior No Power Cord

TERMINAL SETUP

Battery Behavior (No Power Cord)

•activates when the battery is left in an unused terminal for extended periods.

NOTE	• Lithium-ion batteries are not affected by shallow charging. Furthermore, when
	the terminal has no external power source or battery the coin cell battery
	provides power to the security circuit.

•Uninstalling the battery and unplugging the terminal power pack reduce the life of the coin cell battery, which does not recharge and must be replaced if drained.

•Conserve battery power by turning the Vx670 terminal off when not in use. If the terminal is not to be used for an extended period of time, keep the Lithium- ion battery inserted in the terminal, and power up the terminal periodically to check the battery charge. Do not let the battery charge fall below 10% for extended periods of time as this may permanently diminish the battery capacity. Recharge the battery by attaching the power cord to the terminal and plugging the power pack into a wall outlet.

Battery Behavior If you connect the Vx670 to a non-battery power source, the terminal shifts to (No Power Cord) corded power mode and starts up automatically, regardless of the battery charge

state.

Manual Startup Hold the green key down for about 4 seconds until the terminal displays the startup screen.

NOTE The 4-second power-up delay is for preventing terminal startup if the green key is accidentally held down. The time required to hold the green key down to power up the terminal is configurable (for more information, see the Vx670 Reference Manual – VPN 24004).

When the terminal has power, the terminal lights are activated and the green LED indicator remains lit.

NOTE If an application is loaded in the terminal, it starts after the initial VeriFone copyright screen and usually displays a unique copyright screen. If no application is loaded in the terminal, DOWNLOAD NEEDED appears on screen after the initial VeriFone copyright screen.

26VX670 INSTALLATION GUIDE