GE GXUT03B, GNUT03B owner manual Customer Service, housing to fill

8 Repeat steps 2 through 7 for the taste/odor (FXUTB) filter cartridge in the Filter II sump

	Open the filtered water faucet. Then, slowly open the water supply/saddle valve and allow the filter
9
	housing to fill.
	Close the filtered water faucet. Then, check for leaks between the sump and the head.
10
	NOTE: If leaking, turn off the water supply and open the filtered water faucet. Then, disassemble the
	filter and check the o-ring for cuts, flat spots, etc., and sealing surfaces for foreign material. Clean the o-
	ring and lubricate with clean silicone grease. Carefully press into the groove in the sump.
	The filter cartridges contain activated carbon. When new, open the filtered water faucet for ten minutes
11
	to flush the system.

Fig. 5		Bracket
		Head
Cartridge		Sump
O-ring seal
Sump		TURN SUMP
		TO INSTALL
Replacement label
TURN SUMP		Sump
TO REMOVE	Filter II
		wrench
	Filter I
		To
		loosen

11

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips

Customer Service