... saveYour Time allcl Money
BeforeVou Canforservice,
“
Check the I%wbkm-solveril
If you ha~c a problem, it may be minor. You may be able to correct it jrourself. .Just use this Problem Solver to locate your problem and then follow the suggested recommendations.
The Problem Sober
PROBLEM | POSSIBLE CAUSE AND REMEDY |
DISHWASHER WON’T RUN
UNUSUAL NOISE
DISHES DON’T DRY
A fuse in your home may be blown, or the circuit breaker tripped. Replace fuse or reset circuit breaker. Remove any other appliances from the circuit.
Utensils may not be secure on rack pins, Or something small may have dropped from the rack. Water is causing utensils to rattle. Make sure everything is securely placed in dishwasher.
Make sure inlet water temperature is correct. (See page 6.)
Unload the bottom rack first. Water from dishes in the top rack maybe spilling into the bottom rack.
Check for improper loading. Dishes shouldn’t nest together. Avoid overloading.
UNCLEAN DISHES | Check inlet water temperature. It should beat least 120‘F. (To test, |
.4ND FLATWARE | see page 6.) |
BLACK OR GRAY MARKS ON DISHES
To obtain the benefits of a complete cycle, be careful that you do not turn the dia! my further than necessary to start the dishwasher,
Water pressure may be temporarily low. Turn on a faucet. Is water coming out slower than usual? If so, wait until pressure is normal before using your dishwasher.
Plugged air gap. (See page 11.)
Improper rack loading. (See pages 8 & 9.)
Aluminum deposits often leave marks when they rub against other things. Remove marks with a mild abrasive cleanser.
