Installation Preparation
PARTS SUPPLIED:
♦Two #8 Phillips flat head wood screws, 5/8" long to secure dishwasher to underside of countertop or to side of cabinetry. (Taped to top or side of dishwasher.)
♦Side and top trim pieces
♦2 Side mounting brackets with 4 mounting screws (for
Trim Pieces
2 Wood Screws 4, #8 Pan head Phillips Screws | Side Mounting Brackets |
3/8" long for side mounting | (some models) |
(some models) |
|
MATERIALS YOU WILL NEED :
♦Ferrule, compression nut and 90° Elbow (3/8"NPT external thread on one end, opposite end sized to fit water supply)
♦Thread seal tape
♦UL Listed wire nuts (3)
Materials For New Installations Only:
♦Air gap for drain hose, if required
♦Waste tee for house plumbing, if applicable
♦Electrical cable or power cord, if applicable
♦Screw type hose clamps
♦Strain relief for electrical connection.
♦Hand
♦Water line 3/8" min. copper or 1/2" min. plastic (plastic must be tested for temperature and pressure)
♦Coupler for extending drain line, if applicable
| Hand | Wire Nuts (3) | |
90° Elbow, | Thread | ||
Valve | |||
Ferrule and | |||
| Seal Tape | ||
Compression Nut |
| ||
|
|
Electrical Cable | Hot Water line |
| |
(or Power Cord, if applicable) |
|
Waste Tee |
|
Coupler
Air Gap | Screw Type | Strain Relief | |
Hose Clamps | |||
|
|
TOOLS YOU WILL NEED:
♦ Phillips head screwdriver ♦ 5/16" and 1/4" nutdriver
♦6" Adjustable wrench
♦Level
♦Carpenters square
♦Measuring tape
♦ Safety glasses
♦Flashlight
♦Bucket to catch water when flushing the line
♦15/16" socket (optional for skid removal)
♦ Gloves | Flashlight |
|
For New Installations Only: ♦ Tubing cutter
♦ Drill and appropriate bits |
|
|
♦ Hole saw set | Gloves | Bucket |
|
| Level |
1/4" |
|
and 5/16" |
|
Nutdriver |
|
| Carpenters |
6" Adjustable | Square |
Wrench |
|
| Tubing Cutter |
| Measuring Tape |
Safety Glasses |
|
Drill and Bits
Hole Saw Set
2