GEAppliances.com

Service: Manually Initiated Electronics Diagnostics

1. To enter diagnostics, press and hold

SALT

 

the MODE button for 3 seconds until

LEVEL

 

 

 

 

 

the LOW SALT ALARM screen shows.

 

 

2. Press the MODE button 2 times to

SALT

 

 

 

advance through LOW SALT ALARM

LEVEL

 

 

 

 

 

and SALT EFFICIENCY options. See

 

 

Programming the Control for details

 

 

on these two options.

 

 

 

3. OPERATION OF DIAGNOSTICS

 

 

 

 

Motor

Position

 

 

Valve

 

 

switch

 

 

 

 

 

position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SALT￿

 

 

 

 

 

 

LEVEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water meter

Valve Position—Press the RECHARGE button to initiate a recharge cycle. Press again to manually index valve to next position. See Service: Manually Advance Recharge Check for details.

0 – Service

1 – Fill

2 – Brine

3 – Backwash

4 – Fast Rinse

Motor Operation—Two dashes will circulate around when motor should be running.

Position Switch Operation—

Closed—valve rotating to next position

Open—valve in position, service, fill, brine, etc.

Water Meter—Indicates whether water is flowing through valve.

Motor

Position switch

 

Sensor

 

housing

 

Turbine

Valve

Turbine support

and shaft

outlet

 

000 indicates no water is flowing through the valve

Open nearby soft water faucet

000 to 199 (continual) shows water is flowing. Display repeats for each gallon of water passing through the meter. Control will beep at every gallon.

If there is no reading in the display, with faucet open, check the sensor. Pull the sensor from the valve outlet port, and pass a small magnet in front of the sensor. Counter should index in the display. If counter does not index, check to make sure harness is connected to board properly. If there is a reading in the display, there may be a problem associated with the turbine. Turn off water supply, close the by-pass valve, and disconnect by-pass valve from valve body. Check turbine for binding or restriction due to debris. If this does not correct the problem, the Timer, Sensor or Turbine may require replacement.

4.Historical data about the softener is available.

Press and hold the UP button to display the number of days this control has had electrical power applied.

Press and hold the DOWN button to display the number of recharges initiated by this control since the model code number was entered.

5.Press the MODE button to return to normal operation and display.

Service: Set Model (F or H) Code

1.To change or check model code, first press and hold the MODE button for 3 seconds until the LOW SALT ALARM screen shows.

2. Press and hold the MODE button again SALT

for 3 seconds. A display with

LEVEL

at

the top will appear.

 

3.Press the UP or DOWN buttons to select the correct model code.

SR22–GXSF27E, F31–GXSF31E, F35–GXSF35E, F39–GXSF39E, H39–GXSH39E, H45–GNSH45E

4.Press the MODE button one time to return to normal operation and display. If the model code was changed:

the display will go blank momentarily, then display the model code entered.

the display will then return to the set present time display, and the blue indicator light will flash. The control will have to be reprogrammed. See Programming the Control.

NOTE: If the control is left in any of the above diagnostic displays, or a flashing display when setting time, hardness, etc., it will revert back to the normal display in 4 minutes.

17

Page 17
Image 17
GE GXSF39E, GXSF35E installation instructions Service Set Model F or H Code, Position Switch Operation

GXSF39E, GXSF35E specifications

The GE GXSF35E and GXSF39E are sophisticated water filtration systems designed to meet the diverse needs of residential consumers. Offering reliable water purification solutions, these models efficiently remove impurities, ensuring clean and safe water for household use.

Both the GXSF35E and GXSF39E units feature advanced filtration technology, specifically designed to target a broad spectrum of contaminants, including chlorine, sediment, lead, and other harmful substances. The filtration process effectively enhances the taste and smell of drinking water, allowing families to enjoy fresh and clean water directly from their taps.

One of the standout features of these models is their high-capacity filtration capabilities. The GXSF35E boasts a 35,000-gallon capacity, making it suitable for medium to large households. Conversely, the GXSF39E, designed for larger families, offers an impressive 39,000-gallon capacity. This extended capacity ensures that users have access to purified water for an extended period, reducing the frequency of cartridge replacements and associated maintenance.

In terms of technical specifications, both models utilize a unique dual-stage filtration system. The first stage consists of a high-performance sediment filter that captures large particles and sediments, while the second stage employs an activated carbon filter that removes chemical contaminants and enhances taste. This two-tiered approach ensures comprehensive purification and longevity of the filter media.

Another major characteristic of the GXSF35E and GXSF39E is their user-friendly design. With features such as easy installation processes, intuitive control panels, and filter change indicators, these systems cater to users with varying levels of technical expertise. The compact design of the units allows for versatile installation options, whether in basements, under sinks, or in utility rooms.

Both models are also equipped with smart technology, enabling users to monitor filter life through mobile applications or digital displays. This connectivity feature ensures that homeowners are well-informed when it’s time to replace filters, enhancing the system's overall efficiency and effectiveness.

In conclusion, the GE GXSF35E and GXSF39E water filtration systems stand out in the market due to their efficient filtration technologies, high capacity, user-friendly features, and smart monitoring capabilities. They provide an excellent solution for families seeking safe and clean drinking water without the hassles associated with traditional filtration methods.