![Maintenance (Cont.)](/images/new-backgrounds/66967/6696749x1.webp)
Maintenance (Cont.)
CARE
Lift-Off Upper Oven Door
To remove the door:1.Fully open the door.
2.Lift up on the hinge lock toward the oven frame until they stop.
3.Close the door to 45 degrees (you will feel the door stop). The hinge lock will contact the oven frame.
4.On both sides of the door, press down on the release buttons on each hinge.
5.Lift door up until it is clear of the hinge.
6.Pull on hinge arms slightly to relieve pressure on the locking tabs.
7.Push the hinge locks down onto the hinge.
8.Push the hinges in toward the unit so they are closed.
1.Pull the hinges down away from the oven frame to the fully open position.
2.Lift up on the hinge locks toward the oven frame until they stop.
3.The hinges will release to the
4.Slide the door back onto the hinges. Make sure the buttons pop back out.
5.Fully open the door.
6.Push the hinge locks down onto the hinge.
7.Close the oven door.
AND CLEANING:
Oven |
|
frame | Door |
| |
| frame |
Release buttons
Push in
Pull down
Maintenance
Lift-Off Lower Oven Door
The door is very heavy. Be careful when removing and lifting the door.
Do not lift the door by the handle.
To remove the door:
1.Fully open the door.
2.Pull the hinge locks down toward the door frame, to the unlocked position. A tool, such as a small flat- blade screwdriver, may be required.
3.Firmly grasp both sides of the door at the top.
4.Close door to the door removal position. The door should be open approximately 3" with no obstruction above the door.
5.Lift door up and out until both hinge arms are clear of the slots.
Slot
Hinge lock |
|
Pull hinge locks down to unlock | Removal position |
To replace the door:
1.Firmly grasp both sides of the door at the top.
2.Starting on the left side, with the door at the same angle as the removal position, seat the indentation of the hinge arm into the bottom edge of the hinge slot. The notch in the hinge arm must be fully seated into the bottom of the slot. Repeat for right side.
3.Fully open the door. If the door will not fully open, the indentation is not seated correctly in the bottom edge of the slot.
4.Push the hinge locks up against the front frame of the oven cavity, to the locked position.
5.Close the oven door.
| Bottom | Hinge arm |
Hinge | edge of |
|
slot |
| |
arm |
|
|
Hinge |
| Indentation |
lock |
| |
|
| |
| Push hinge locks up to lock |
|
25 | |
|