Instructions Safety Instructions

International Installation Instructions. (220–240, 50/60Hz, 2-wire)

Read these instructions completely and carefully.

Flooring Under the Range

Your range, like many other household items, is heavy and can

When the floor covering ends at the front of the

settle into soft floor coverings such as cushioned vinyl or

range, the area that the range will rest on should be

carpeting.

built up with plywood to the same level or higher

 

When moving the range on this type of flooring, it

than the floor covering. This will allow the range to

″

be moved for cleaning or servicing.

should be installed on a 6 mm (1/4 ) thick sheet of

 

plywood (or similar material) as follows:

 

 

 

Prepare for Electrical Connection

 

Operating

Use a certified range power cord. Such a cord will be marked with a symbol of certification. If you are unsure about the certification of your range power cord, please consult with your local electrical parts distributor and obtain one or have a licensed electrician install your range. Finally, you may have to purchase a separate strain relief if your cord is not accompanied by one.

A range cord rated for 40A usage is recommended. The cord must also have a minimum 250V rating. A 50A cord is not recommended but, if used, it should be marked for use with nominal 3.49 cm (13⁄8″) diameter connection openings. Care should be taken to center cable and strain relief (discussed in Step 3) within knockout hole to keep cable from rubbing the edge.

and Cleaning

Power Cord Strain Relief Installation

Remove the lower rear range wiring cover to expose the connector block and bracket.

Remove the knockout ring 3.49 cm (13⁄8″) located on bracket directly below the connector. To remove the knockout, use a pair

Use ring terminals which have screw hole openings of sufficient size for the terminal screws and ground screw to be used in Step 4. The above illustration depicts a power cord with “ring” terminals on the ends of the power cord leads.

Instructions Care

of pliers to bend the knockout ring away from the bracket and twist until ring is removed.

Knockout ring in bracket.

Knockout ring removed.

Assemble the strain relief in the hole. Insert the power cord through the strain relief and tighten. Allow enough slack to easily attach the cord terminals to the connector block. If tabs

“closed barrel”

terminal

This is a close-up view of a “ring” terminal. The ring terminal shown in this close-up illustration is the “closed barrel” type. We recommend use of the “closed barrel” type with a large enough “barrel” to accommodate the cord leads. Proper crimping force should be applied to connect stranded wires to the ring terminals.

Troubleshooting Tips Installation

are present at the end of the winged strain relief, they can be removed for better fit.

NOTE: Do not install the power cord without a strain relief. The strain relief bracket should be installed before reinstalling the rear range wiring cover.

 

 

 

 

 

 

 

 

 

 

Wiring cover

 

Connector block

 

 

 

(shown removed)

 

 

 

 

 

 

Ring terminals

 

 

 

 

 

 

 

 

 

 

 

Green

 

 

 

 

 

 

 

 

 

 

ground

 

 

 

 

 

 

 

 

 

 

screw and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

plate

 

 

 

 

 

 

 

 

 

 

Bracket

Strain relief bracket

 

 

 

Power cord

(Provided with range cord.

 

 

 

 

26

 

 

 

Not part of range.)

 

 

 

Strain relief

 

 

 

 

“stranded wires” NOTE: If your range power cord is “stranded” and is not

terminated with ring terminals,

you MUST attach the above terminals to the cord leads. A “stranded” power cable is one with many thin wires twisted together as shown in this illustration.

Page 25 Page 27
Page 26
Image 26
GE JBP76WI, JBP46WI, JBS07PI, 49-8830-1A, 164D3333P072 owner manual Operating, Cleaning, Troubleshooting Tips Installation
Page 25 Page 27

164D3333P072, 49-8830-1A, JBS07PI, JBP76WI, JBP46WI specifications

GE has long been recognized for its commitment to innovation and quality when it comes to kitchen appliances. The company’s range of electric ranges, including models JBP46WI, JBP76WI, JBS07PI, and the replacement part 49-8830-1A, along with the igniter 164D3333P072, showcases modern technologies combined with ease of use, making cooking convenient and efficient.

The GE JBP46WI offers a blend of performance and versatility. This model features a sleek white finish, making it a stylish addition to any kitchen. One of the key characteristics is the four burner layout, providing ample space for multiple pots and pans. The heavy-duty cast iron grates are designed for durability, offering excellent heat retention and a stable cooking surface. Additionally, the JBP46WI includes a large oven with a capacity of 5.0 cubic feet, accommodating various baking dishes and catering needs.

Moving to the GE JBP76WI, this model raises the bar with advanced cooking technology. It features a self-cleaning oven, reducing the hassle of maintenance and ensuring hygiene with minimal effort. Another stellar feature is the precise simmer burner, allowing for delicate cooking tasks such as melting chocolate or preparing sauces. The JBP76WI also incorporates an electronic oven control, improving temperature accuracy for perfect results every time.

The GE JBS07PI model emphasizes energy efficiency without sacrificing performance. This model is designed with a smooth glass cooktop, providing a contemporary look while allowing for easy cleaning. With its built-in oven light and a large viewing window, users can monitor their cooking without opening the door, thus maintaining consistent temperature.

The replacement part 49-8830-1A is essential for those looking to maintain their GE ranges, ensuring continued performance and efficiency. The igniter 164D3333P072 is crucial for reliable ignition, enabling a safe and quick startup of gas burners.

In summary, GE's JBP46WI, JBP76WI, and JBS07PI models represent an incredible blend of design, functionality, and advanced technology. Their features cater to both everyday cooking needs and specific culinary tasks, while the replacement parts enhance the longevity and reliability of these essential kitchen appliances. With GE, users can expect a rewarding and efficient cooking experience that stands the test of time.
Top Page Image Contents