GE JBS56 installation instructions Control Panel and Knobs, To remove the storage drawer

Models: JBS56

1 52
Download 52 pages 54.79 Kb
Page 28
Image 28

Safety Instructions

 

Operating

Instructions

 

 

 

Care and Cleaning

 

 

 

 

Installation

Instructions

 

 

 

 

Troubleshooting

Tips

 

 

 

Consumer Support

 

 

 

Care and cleaning of the range.

Storage Drawer Removal (on some models)

To remove the storage drawer:

To replace the storage drawer:

Pull the drawer out all the way.

Tilt up the front and remove it.

Clean under the range.

Insert glides at the back of the drawer beyond the stop on range glides.

Lift the drawer if necessary to insert easily.

Let the front of the drawer down, then push in to close.

 

Control Panel and Knobs

 

It’s a good idea to wipe the control panel after

 

each use of the oven. Use a damp cloth to

 

clean or rinse. For cleaning, use mild soap

 

and water or a 50/50 solution of vinegar and

Pull the knob straight off the stem.

water. For rinsing, use clean water. Polish dry

with a soft cloth.

 

 

Do not use abrasive cleansers, strong liquid

 

cleaners, plastic scouring pads or oven

 

cleaners on the control panel—they will

 

damage the finish.

 

The control knobs may be removed for easier

 

cleaning.

Make sure the knobs are in the Off positions and pull them straight off the stems for cleaning.

The knobs can be cleaned in a dishwasher or they may also be washed with soap and water. Make sure the insides of the knobs are dry before replacing.

Replace the knobs in the Off position to ensure proper placement.

28

Page 28
Image 28
GE JBS56 installation instructions Control Panel and Knobs, To remove the storage drawer