Installation Instructions
IMPORTANT SAFETY INSTRUCTIONS
For Your Safety
•Be sure your oven is installed properly by a qualified installer or service technician.
•Be sure the oven is securely installed in a cabinet that is firmly attached to the house structure. Weight on the oven door could cause the oven to tip and result in injury. Never allow anyone to climb, sit, stand or hang on the oven door.
•Make sure the cabinets and wall coverings
around the oven can withstand the temperatures (up to 93°C [200°F]) generated by the oven.
WARNING: The electrical
power to the oven supply line must be shut off while line connections are being made. Failure to do so could result in serious injury
or death.
Electrical
Requirements
This appliance must be supplied with the proper voltage and frequency, and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or fuse. See the rating plate located on the oven frame to determine the rating of the product. Use the chart below to determine the minimum recommended dedicated circuit protection.
|
|
| Recommended |
| KW Rating | KW Rating | Circuit Size |
| 240V | 208V | (Dedicated) |
| ≤4.8 KW | ≤4.1 KW | 20 Amp |
4.9 | 4.3 | 30 Amp | |
7.3 | 6.3 | 40 Amp | |
9.7 | 8.4 | 50 Amp |
Electrical Requirements (cont.)
Rating Plate is located on oven side trim, side front frame or lower front frame.
Rating Plate |
Location |
We recommend you have the electrical wiring and hookup of your oven connected by a qualified electrician. After installation, have the electrician show you where your main oven disconnect is located.
Check with your local utilities for electrical codes which apply in your area. Failure to wire your oven according to governing codes could result in a hazardous condition. If there are no local codes, your oven must be wired and fused to meet the requirements of CAN/ CSA C22.2 No.
You must use a
2
