GE PCK916, JCTP30, JCKS10, JCKP70 Cutout for 27″ 68.6 cm Single Built-InOvens only, Under Counter

Models: PCT920 PCT916 PCK916 PCK920 JCTP70 JCKP30 JCKP70 JCKS10 JCTP30

1 28
Download 28 pages 41.36 Kb
Page 6
Image 6
Cutout for 27″ (68.6 cm) Single Built-In Ovens only
For JCKP30, JCKP70, JCKS10, PCK916, PCK920 models only.

Installation Instructions

A

Cutout for 27(68.6 cm) Single Built-In Ovens only

Under Counter

Electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.

240V / 208V

 

Junction Box

 

Location (junction

Electrical connections for

box may be in

cooktop must be located in

adjacent cabinet)

an adjacent accessible

 

63.5 cm (25)

Top and/or side fillers may be necessary

19.7 cm (7 3/4)

location to the right.

 

 

Max.

 

 

 

 

if unit is positioned between existing cabinets. Be sure they are attached securely, since they will anchor the oven in the cabinet.

1.9cm (3/4)

Support Platform

Required

63.5cm

(25) Min.

64.1cm

(25 1/4) Max.

70.2cm

(27 5/8) Min.

71.4 cm

(28 1/8) Max.

Allow 2.5 cm (1) overlap top of oven,

2.5cm (1) overlap side edges of cutout and 2.5 cm (1) overlap bottom of cutout

Must match toekick height

55.9cm (22)

Min. Above Support Platform

61 cm (24)

10.2 cm (4)

Typical

Toekick

91.4cm (36)

Typical Countertop Height

MUST SUPPORT 68 Kg (150 LBS.)

NOTE: This oven is only approved to be installed under the specific models as labeled on this unit.

6

Page 6
Image 6
GE PCK916, JCTP30, JCKS10, JCKP70 Cutout for 27″ 68.6 cm Single Built-InOvens only, Under Counter, Installation Instructions