www.GEAppliances.com
Safety
+ |
|
| Tones at the End of a Timed Cycle | |
|
| At the end of a timed cycle, 3 short beeps will | ||
|
| |||
|
| |||
|
|
|
| sound followed by one beep every 6 seconds until |
|
|
|
| the CLEAR/OFF pad is pressed. This continual |
|
|
|
| |
|
|
|
| 6 second beep may be canceled. |
|
|
|
| To cancel the 6 second beep: |
|
|
|
| Press the BAKE and BROIL HI/LO pads |
|
|
|
| at the same time for 3 seconds until |
|
|
|
| the display shows SF. |
Press the KITCHEN TIMER ON/OFF pad. The display shows CON BEEP (continual beep). Press the KITCHEN TIMER ON/OFF pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)
Press the START pad.
Instructions Operating
12 Hour, 24 Hour or Clock Black-Out
+ | Your control is set to use a 12 hour clock. |
|
If you would prefer to have a 24 hour military time clock or
Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Press the CLOCK pad once. The display will show 12 hr. If this is the choice you want, press the START pad.
Press the CLOCK pad again to change to the 24 hour military time clock. The display will show 24 hr. If this is the choice you want, press the START pad.
Press the CLOCK pad again to
NOTE: If the clock is in the
Instructions Care and Cleaning
Cook and Hold
+ 
Your control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after the cooking function is finished.
To activate this feature, follow the steps below.
Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Press the COOKING TIME pad. The display will show Hld OFF.
Press the COOKING TIME pad again to activate the feature. The display will show Hld ON.
Press the START pad to activate the cook and hold feature and leave the control set in this special features mode.
Troubleshooting Tips Consumer Support
19
