Safety Information

Troubleshooting Tips Operating Instructions

Troubleshooting tips.

Problem

 

Possible Causes

What To Do

 

Oven will not start

 

A fuse in your home

Replace fuse or reset

 

 

 

may be blown or the

circuit breaker.

 

 

circuit breaker tripped.

 

 

 

 

 

 

 

 

 

Power surge.

Unplug the microwave

 

 

 

oven, then plug it back in.

 

 

 

 

 

 

 

Plug not fully inserted

Make sure the 3-prong

 

 

into wall outlet.

plug on the oven is fully

 

 

 

inserted into wall outlet.

 

 

 

 

 

 

 

Door not securely closed.

Open the door and close

 

 

 

securely.

 

 

 

 

 

Control panellighted,

 

Door not securely closed.

Open the door and close

yet oven will not start

 

 

securely.

 

 

 

 

 

 

 

Start pad not pressed

Press Start.

 

 

after entering cooking

 

 

 

 

selection.

 

 

 

 

 

 

 

 

 

Another selection entered

Press Pause/Canceltwice

 

 

already in oven and

to cancel.

 

 

Pause/Cancel pad not

 

 

 

 

pressed to cancel it.

 

 

 

 

 

 

 

 

 

Pause/Cancel was pressed

Press Start.

 

 

accidentally.

 

 

 

 

 

 

 

 

 

Food weight not entered

Make sure you have

 

 

after pressing Defrost.

entered food weight

 

 

 

after pressing Defrost.

 

 

 

 

 

–F3– Key Short Error

 

Keypaddepressionwas

PressPause/Cancelto clear.

 

 

detected for 10+ seconds.

If problem persists, call for

 

 

 

service.

 

 

 

 

 

–F4– Sensor Short Error

 

Sensormalfunction.

Call for service.

 

 

 

 

 

–F5– Sensor Open Error

 

Sensormalfunction.

Call for service.

 

 

 

 

 

–F6– Cooling Error

 

Sensor/fan malfunction.

Call for service.

Consumer Support

–F7– Operation Error

26

Sensorerror may have

PressPause/Cancelto clear.

occurred if…

If problem persists, call for

– During use of a sensor

service.

feature, steam couldnot be detected before the door was opened.

Steam could not be detected

in the maximum amount of time.

Food amounttoo large for sensorreheat. See “Operating Instructions.”