GE JGBP88, JGB918 Using the clock and timer, Consumer Support Troubleshooting Tips Installation

Models: JGB918 JGBP88

1 64
Download 64 pages 57.2 Kb
Page 16
Image 16
Using the clock and timer.

Instructions

Using the clock and timer.

Not all features are on all models.

Operating Instructions Safety

OR

HOLD 3 SEC. TO

SET CLOCK

Make sure the clock is set to the correct time of day.

To Set the Clock

The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a timed baking or self- cleaning cycle.

On models with a CLOCK pad, touch it once to set. On models with a TIMER/CLOCK pad, touch and hold the pad until the display changes.

Touch the number pads.

Touch the number pads the same way you read them. For example, to set 12:34, touch the number pads 1, 2, 3 and 4 in that order.

If number pads are not touched within one minute after you touch the CLOCK pad, the display reverts to the original setting. If this happens, touch the CLOCK pad and reenter the time of day.

Touch the START pad until the time of day shows in the display. This enters the time and starts the clock.

To check the time of day when the display is showing other information:

On models with a CLOCK pad, simply touch the CLOCK pad.

On models with a TIMER/CLOCK pad, touch and hold the TIMER/CLOCK pad until the time of day is displayed.

The time of day shows until another pad is touched.

Instructions

OR

HOLD 3 SEC. TO

To Set the Timer

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.

Touch the START pad. After pressing the START pad, SET disappears; this tells you the time is counting down,

+

SET CLOCK

Touch the KITCHEN TIMER ON/OFF

or TIMER/CLOCK (depending on model) pad.

although the display does not change until one minute has passed.

When the timer reaches :00, the control will beep 3 times followed

Consumer Support Troubleshooting Tips Installation

The timer is a minute timer only.

The CLEAR/OFF pad does not affect the timer.

Touch the number pads until the amount of time you want shows in the display. The maximum time that can be entered in minutes is 59. Times more than 59 minutes should be changed to hours and minutes. For example, to enter 90 minutes as 1 hour 30 minutes, touch 1, 3 and 0 in that order.

If you make a mistake, press the KITCHEN TIMER ON/OFF or TIMER/CLOCK (depending on model) pad and begin again.

by one beep every 6 seconds until the KITCHEN TIMER ON/OFF or TIMER/CLOCK (depending on model) pad is touched.

The 6 second tone can be canceled by following the steps in the Special features of your oven control section under Tones at the End of

a Timed Cycle.

16

Page 16
Image 16
GE JGBP88 Using the clock and timer, Consumer Support Troubleshooting Tips Installation, To Set the Clock, Instructions