Installation Instructions

1PROVIDE ADEQUATE GAS SUPPLY

Your range is designed to operate at a pressure of 5″ of water column on natural gas or, if designed for LP gas (propane or butane), 10 ″ of water column.

Make sure you are supplying your range with the type of gas for which it is designed.

This range is convertible for use on natural or propane gas. If you decide to use this range on LP gas, conversion must be made by a qualified LP installer before attempting to operate the range on that gas.

For proper operation, the pressure of natural gas supplied to the regulator must be between 5″ and 13″ of water column.

For LP gas, the pressure supplied must be between 10″ and 13″ of water column.

When checking for proper operation of the regulator, the inlet pressure must be at least 1″ greater than the operating (manifold) pressure as given above.

The pressure regulator located at the inlet of the range manifold must remain in the supply line regardless of whether natural or LP gas is being used.

A flexible metal appliance connector used to connect the range to the gas supply line should have an I.D. of 1/2″ and be 5 feet in length for ease of installation. In Canada, flexible connectors must be single wall metal connectors no longer than 6 feet in length.

2CONNECT THE RANGE TO GAS

Shut off the main gas supply valve before disconnecting the old range and leave it off until the new hook-up has been completed. Don’t forget to relight the pilot on other gas appliances when you turn the gas back on.

Because hard piping restricts movement of the range, the use of a CSA International-certified flexible metal appliance connector is recommended unless local codes require a hard-piped connection.

Never use an old connector when installing a new range. If the hard piping method is used, you must carefully align the pipe; the range cannot be moved after the connection is made.

To prevent gas leaks, put pipe joint compound on, or wrap pipe thread tape with Teflon* around, all male (external) pipe threads.

A. Install a manual gas line shut-off valve in the gas line in an easily accessed location outside of the range. Make sure everyone operating the range knows where and how to shut off the gas supply to the range.

B. Install male 1/2″ flare union adapter to the 1/2″ NPT internal thread at inlet of regulator. Use a backup wrench on the regulator fitting to avoid damage.

When installing the range from the front, remove the 90° elbow for easier installation.

C. Install male 1/2″ or 3/4″ flare union adapter to the NPT internal thread of the manual shut-off valve, taking care to back-up the shut-off valve to keep it from turning.

D. Connect flexible metal appliance connector to the adapter on the range. Position range to permit connection at the shut-off valve.

E. When all connections have been made, make sure all range controls are in the off position and turn on the main gas supply valve. Use a liquid leak detector at all joints and connections to check for leaks in the system.

WARNING: DO NOT USE A FLAME TO CHECK FOR GAS LEAKS.

When using test pressures greater than 1/2 psig to pressure test the gas supply system of the residence, disconnect the range and individual shut-off valve from the gas supply piping. When using test pressures of 1/2 psig or less to test the gas supply system, simply isolate the range from the gas supply system by closing the individual shut-off valve.

*Teflon: Registered trademark of DuPont

46

Page 45 Page 47
Page 46
Image 46
GE JGBP88, JGB918 manual Provide Adequate GAS Supply, Connect the Range to GAS
Page 45 Page 47

JGB918, JGBP88 specifications

The GE JGBP88 and JGB918 are notable models in the realm of gas ranges, designed to meet the culinary needs of modern home cooks. Both appliances offer a wealth of features and cutting-edge technologies, enhancing cooking efficiency and convenience in the kitchen.

The GE JGBP88 is a freestanding gas range that stands out for its stylish appearance and practical design. One of its main features is the sealed burners, which ensure even heat distribution and make cleaning effortless, as spills won't flow underneath the burners. This model typically offers a powerful 18,000 BTU burner, ideal for rapid boiling and searing, along with multiple simmer burners that provide precision control for delicate sauces or melting chocolate.

Another significant characteristic of the JGBP88 is its spacious oven capacity, often reaching around 5.0 cubic feet. It includes features like a self-cleaning option, which helps maintain the oven's interior with minimal effort. The oven also incorporates an interior oven light, allowing users to monitor cooking progress without opening the door and losing heat.

The GE JGB918 builds upon this foundational set of features while incorporating advanced technology. It frequently includes a convection oven option, which promotes even cooking results by circulating hot air throughout the oven. This feature is particularly advantageous for baking and roasting, as it can significantly reduce cooking times and enhance the quality of baked goods.

Moreover, the JGB918 often features WiFi connectivity, allowing users to control and monitor their oven remotely through a smartphone app. This smart feature enables cooks to preheat the oven, adjust cooking times, and receive alerts when their dish is ready, seamlessly integrating convenience with modern technology.

In terms of design, both the JGBP88 and JGB918 are available in various finishes, allowing them to complement any kitchen aesthetic. Their intuitive control knobs and touch pad make operation user-friendly, catering to chefs of all skill levels.

Overall, the GE JGBP88 and JGB918 gas ranges represent a fusion of innovative technology, practical features, and stylish design, making them essential appliances for any home chef looking to elevate their cooking experience.
Top Page Image Contents