Installation Instructions
3ELECTRICAL CONNECTIONS (CONT.)
B. Usage Situations where Appliance Power Cord will be Disconnected Frequently.
Do not use an adapter plug in these situations because disconnecting of the power cord places undue strain on the adapter and leads to eventual failure of the adapter ground terminal. The customer should have the two- prong wall receptacle replaced with a
The installation of appliances designed for mobile home installation must conform with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part
280)or, when such standard is not applicable, the Standard for Manufactured Home Installations, latest edition (Manufactured Home Sites, Communities and
Electric Disconnect
■Locate disconnect plug on the range back.
■Pinch sides of connector and pull out of range back.
4SEAL THE OPENINGS
Seal any openings in the wall behind the range and in the floor under the range when hookups are completed.
5ASSEMBLE SURFACE BURNERS
AAssemble the side burners as shown.
Side |
| |
Grate |
| |
| Burner cap | |
Burner base | Electrode | |
(not removable | ||
| ||
on side burners) |
|
BAssemble the center burner. Make sure that the center griddle sits square and level between the
side grates.
Center
Griddle
Burner head and cap assembly
Electrode
CAUTION: Do not operate the burner without all burner parts in place.
| Oval head and cap |
|
Medium burner | assembly | Small burner |
| ||
head and cap |
| head and cap |
| Front of range |
Large burner | Extra large burner |
head and cap | head and cap |
Place the burner caps on the cooktop. Make sure that the caps are placed in the correct locations. There is one oval (center) head and cap assembly, one small cap, one medium cap, one large cap, and one extra large cap.
Slot
Electrode
Make sure the slot in the burner head is positioned over the electrode.
50
