GENERAL

See Dimensions and Clearances in this section for all rough-in and spacing dimensions. These dimensions must be met for safe use of your range. The location of the electrical outiet md pipe opening (see Gas Pipe and Electric Outlet Locations) may be adjusted to meet specific requirements.

The range may be placed with O“ clearance (flush) at the back wdl and sidewalls of the range.

LO~TION

Do not locate the range where it may be subject to strong drafts. Any openings in the floor or wall behind the range should be sealed. Make sure the openings around the base of the range that supply fresh air for combustion and ventilation are not obstructed by carpeting or woodwork.

PROTECT YOUR FLOOR

Your range, like many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting. Use care when moving the range on this type of flooring. It is recommended that the following simple and inexpensive instructions be followed to protect your floor.

The range should be installed on a sheet of plywood (or similar material). men the floor covering ends at the front of the range, the area that the range will rest on should be built up with plywood to the same level or higher than the floor covering. This will allow the range to be moved for cleaning or servicing. Mso, make sure your floor covering will withstand 180°E (See the Important Safety Instructions section of the Instillation Instructions.)

KITCHEN ~BINETS

Make sure the wall coverings around your range can withstind the heat generated (up to 200°F) by the range. (See the Importint Safety Instructions section of the Installation Instructions.)

MODEL AND SERIAL NUMBER LO~TION

Depending on your range, you’ll find the model and serial numbers on a label on the front frame of the range, behind the storage drawer, kick panel or broiler drawer.

I TOOLSYOU WILL NEED

I

Phillips and flat-blade screwdrivers

Pencil and ruler

Two pipe wrenches (one for backup)

1%” open-end or adjustable wrench

Nut drivers or wrenches: 3/16” and 1/4”

ADDITIONAL WTERWLS YOU WY NEED

Gas line shut-off valve

Pipe joint sealant or UL-approved pipe thread tape with Teflon* that resists action of natural and LP gases

Flexible metal appliance connector (1/2” I. D.) A 5-foot length is recommended for ease of installation but other lengths are acceptable. Never use an old connector when installing a new range.

Flare union adapter for connection to gas supply line (3/4” or 1/2” NPTx 1/2” I. D.)

Flare union adapter for connection to pressure regulator on range (1/2” NPTx 1/2” I. D.)

*Teflon: Registered trademark of DuPont

PREPARATION

. Remove all tape and packaging. Lift up the cooktop (on models with standard tin burners) and remove any packing material under it. Make sure the standard twin burners are properly seated and level.

Take the accessory pack out of the oven.

Check to be sure that no range parts have come loose during shipping.

30

Page 30
Image 30
GE JGBS18, JGBC18 manual General

JGBC18, JGBS18 specifications

The GE JGBS18 and JGBC18 are modern gas ranges that combine functionality with advanced technology, catering to both professional chefs and home cooks. These models are designed to optimize cooking performance while enhancing user experience.

One of the standout features of the JGBS18 and JGBC18 is their powerful burners, including a high-output burner that delivers an impressive 15,000 BTUs. This allows for rapid heating and boiling, making it ideal for a variety of cooking techniques. The precision simmer burner is another highlight, providing low, even heat for delicate tasks such as melting chocolate or preparing sauces.

In terms of technology, GE integrates its TrueTemp system for consistent oven temperatures, ensuring that dishes cook evenly from all angles. The range features an easy-to-use electronic oven control that provides precise temperature settings and cooking modes, including bake, broil, and clean functions. The self-cleaning feature simplifies maintenance, using high temperatures to eliminate food residue, leaving the oven clean without the need for harsh chemicals.

The oven's interior is coated with a durable enamel finish that resists stains and provides easy cleanup. With a total oven capacity of 5.0 cubic feet, the JGBS18 and JGBC18 can accommodate multiple dishes, making it suitable for families or entertaining guests. The oven also includes a convenient interior oven light that lets users monitor cooking progress without opening the door, ensuring heat is retained.

Design-wise, both models boast sleek finishes that blend seamlessly into various kitchen decors. The heavy-duty cast iron grates provide a sturdy cooking surface and enhance the aesthetics of the range. The models come equipped with a standard broiler drawer, allowing for versatile cooking options, from broiling meats to toasting bread.

Safety features are paramount in the JGBS18 and JGBC18 designs, which include a gas safety shutoff system, preventing gas leaks and providing peace of mind. The ignition system is designed for reliable starting every time, ensuring that users can start cooking with confidence.

In summary, the GE JGBS18 and JGBC18 gas ranges offer a blend of powerful cooking capabilities, user-friendly technology, and thoughtful design details, making them ideal choices for those looking to elevate their culinary experience while maintaining ease of use and safety in the kitchen.