Using the roasting feature.

Roasting is cooking by dry heat. Tender meat or poultry can be roasted uncovered in your oven. Roasting temperatures, which should be low and steady, keep spattering to a minimum.

Before You Begin Roasting…

Safety

Roasting is really a baking procedure used for meats. Therefore, the oven controls are set for Baking or Timed Baking. (You may hear a slight clicking sound, indicating the oven is working properly.) Timed Baking will turn the oven on and off automatically.

Most meats continue to cook slightly after being removed from the oven. The internal temperature will rise about 5° to 10°F. during the recommended standing time of 10 to 20 minutes. This allows roasts to firm up and makes them easier to carve.

To compensate for this rise in temperature, you may want to remove the roast sooner (at 5° to 10°F. less than the temperature in the Roasting Guide).

REMEMBER: Food will continue to cook in the hot oven and therefore should be removed when the desired internal temperature has been reached.

Instructions

Operating

How to Set Your Oven for Roasting

Place the shelf in A or B position.

No preheating is necessary.

Check the weight of the meat. Place the meat fat side up, or poultry breast side up, on roasting grid in a shallow pan. The melting fat will baste the meat. Select a pan as close to the size of the meat as possible. (The broiler pan with grid is a good pan for this.)

Touch the BAKE pad.

To change the oven temperature during the roasting cycle, touch the BAKE pad and set the new temperature.

Touch the TEMP +/– pad to set the oven temperature.

Touch the START pad.

Touch the CLEAR/OFF pad when roasting is finished.

Aluminum Foil

You can use aluminum foil to line the broiler pan. This makes clean-up easier when using the pan for marinating, cooking with fruits, cooking heavily cured meats or basting food during cooking. Press the foil tightly around the inside of the pan.

19

Instructions

Troubleshooting Tips

Customer Service

Page 18 Page 20
Page 19
Image 19
GE JGRP17 owner manual Using the roasting feature, Before You Begin Roasting…, How to Set Your Oven for Roasting
Page 18 Page 20

JGRP17 specifications

The GE JGRP17 is a cutting-edge gas turbine engine designed primarily for use in industrial applications, distinguishing itself with a blend of advanced technology and robust performance. This engine is part of GE’s extensive portfolio of gas turbine systems, which are renowned for their efficiency, reliability, and adaptability.

One of the main features of the JGRP17 is its high thermal efficiency, enabling it to convert a greater proportion of fuel energy into usable power. This efficiency is achieved through sophisticated aerodynamic design and advanced materials that withstand high temperatures, resulting in lower fuel consumption and reduced emissions. The engine's modular design also contributes to its high performance, allowing for easier maintenance and reduced downtime during repairs or overhauls.

Another notable characteristic of the JGRP17 is its versatility. It can operate on a variety of fuels, including natural gas and liquid fuels, making it suitable for diverse applications across multiple sectors, from power generation to marine propulsion. The engine is engineered to provide reliable operation in various environmental conditions, ensuring consistent performance regardless of location.

The JGRP17 incorporates advanced control systems that enhance its operational efficiency and reliability. These systems utilize real-time monitoring and data analytics to optimize performance and detect potential issues before they escalate, thereby improving overall safety and operational longevity. These smart technologies are complemented by GE's legacy of engineering excellence, resulting in an engine that not only meets current industry standards but also anticipates future demands.

In addition to technical advancements, the GE JGRP17 is designed with sustainability in mind. Its lower emissions profile is a significant advantage in today’s climate-conscious market, facilitating compliance with stringent environmental regulations. The turbine's efficient performance contributes to reduced carbon footprints, making it an attractive option for companies looking to enhance their sustainability practices.

Overall, the GE JGRP17 gas turbine engine exemplifies the convergence of advanced engineering, efficiency, and environmental responsibility. With its powerful performance, flexible fuel options, and commitment to sustainability, it represents a significant advancement in industrial gas turbine technology, positioning itself as a reliable choice for a variety of energy and propulsion applications in an evolving marketplace.
Top Page Image Contents