Power Failure
If a flashing time of day is in the display, you have experienced a power failure. Reset the clock.
To reset the clock, touch the CLOCK pad. Enter the correct time of day by touching the HOUR and MIN +/– pads. Touch the START pad.
The control has a series of tones that will sound at different times. These tones may sound while you set the control for an oven function or at the end of the oven function. They will also alert you when an incorrect time or temperature has been entered or if there is a problem with the oven.
Safety Instructions
Operating
Tones While Setting the Control
When you touch a touch pad you will hear a beep. This beep will let you know you have placed enough pressure on the pad to activate it.
Preheat Notification Tone
When you set an oven temperature the oven automatically starts to heat. When the temperature inside the oven reaches your set temperature a tone will sound to let you know to place the food in the oven.
Instructions
Attention Tone
This tone will sound if you set an invalid function or try to set an additional function. The tone can be quickly identified by watching the display messages.
9
Troubleshooting Tips
Customer Service
