Safety Instructions

Using the clock and timer.

Clock

The clock must be set for the automatic oven timing functions to work properly.

The time of day clock cannot be changed during Delay Start. (It can be changed during a regular bake or broil operation.)

Operating Instructions

To Set the Clock

Touch the CLOCK pad.

Touch the HOUR and MIN +/– pads to set the time of day.

Touch the START pad. This enters the time and starts the clock.

To check the time of day when the

display is showing other information, simply touch the CLOCK pad. The time of day shows until another pad is touched.

Tips

Timer

You may program the timer to time cooking or other household activities for up to 9 hours and 59 minutes.

The timer counts down in minutes,

1 minute at a time, until the last 60 seconds are reached, then the control will beep one time. The sections will not be displayed until the last minute is reached.

When the timer reaches “:00”, the control will beep 3 times followed by one beep every 6 seconds until KITCHEN TIMER ON/OFF is touched.

The 6-second tone can be canceled by following the steps in the Special Features of Your Oven Control section under Tones at the End of a Timed Cycle.

Troubleshooting

Customer Service

How to Set the Timer

Touch the KITCHEN TIMER ON/OFF pad.

Touch the HOUR and MIN +/– pads until the amount of time you want shows in the display.

If you make a mistake, touch the KITCHEN TIMER ON/OFF pad and begin again.

Touch the START pad.

After touching the START pad, SET disappears; this tells you the time is counting down, although the display does not change until one minute has passed.

When time is up, the oven control signals until you touch the KITCHEN TIMER ON/OFF pad. Display then shows the time of day.

NOTE: The minute timer is independent of all the other functions and it does not control the oven. The CLEAR/OFF pad does not affect the timer.

8

Page 7 Page 9
Page 8
Image 8
GE JGRP17 owner manual Using the clock and timer, To Set the Clock, How to Set the Timer
Page 7 Page 9

JGRP17 specifications

The GE JGRP17 is a cutting-edge gas turbine engine designed primarily for use in industrial applications, distinguishing itself with a blend of advanced technology and robust performance. This engine is part of GE’s extensive portfolio of gas turbine systems, which are renowned for their efficiency, reliability, and adaptability.

One of the main features of the JGRP17 is its high thermal efficiency, enabling it to convert a greater proportion of fuel energy into usable power. This efficiency is achieved through sophisticated aerodynamic design and advanced materials that withstand high temperatures, resulting in lower fuel consumption and reduced emissions. The engine's modular design also contributes to its high performance, allowing for easier maintenance and reduced downtime during repairs or overhauls.

Another notable characteristic of the JGRP17 is its versatility. It can operate on a variety of fuels, including natural gas and liquid fuels, making it suitable for diverse applications across multiple sectors, from power generation to marine propulsion. The engine is engineered to provide reliable operation in various environmental conditions, ensuring consistent performance regardless of location.

The JGRP17 incorporates advanced control systems that enhance its operational efficiency and reliability. These systems utilize real-time monitoring and data analytics to optimize performance and detect potential issues before they escalate, thereby improving overall safety and operational longevity. These smart technologies are complemented by GE's legacy of engineering excellence, resulting in an engine that not only meets current industry standards but also anticipates future demands.

In addition to technical advancements, the GE JGRP17 is designed with sustainability in mind. Its lower emissions profile is a significant advantage in today’s climate-conscious market, facilitating compliance with stringent environmental regulations. The turbine's efficient performance contributes to reduced carbon footprints, making it an attractive option for companies looking to enhance their sustainability practices.

Overall, the GE JGRP17 gas turbine engine exemplifies the convergence of advanced engineering, efficiency, and environmental responsibility. With its powerful performance, flexible fuel options, and commitment to sustainability, it represents a significant advancement in industrial gas turbine technology, positioning itself as a reliable choice for a variety of energy and propulsion applications in an evolving marketplace.
Top Page Image Contents