Care and cleaning of the oven.

Safety Instructions

Operating Instructions

Removable Oven Bottom

The oven bottom can be removed to clean large spills, and to enable you to reach the oven burner.

Unlock

Lock

Oven bottom must be replaced before using

the self-clean cycle.

To remove:

Slide the tab at the center front of the oven bottom to the left.

Lift the oven bottom up and out.

To replace:

Slip the oven bottom into the oven so the tabs in the rear of the oven bottom fit into the slots in the oven back.

Lower the front of the oven bottom into place and slide the front tab to the right to lock the oven bottom into place.

The oven bottom has a porcelain enamel finish. To make cleaning easier, protect the oven bottom from excessive spillovers by placing a cookie sheet on the shelf below the shelf you are cooking on. This is particularly important when baking a fruit pie or other foods with a high acid content. Hot fruit fillings or other foods that are highly acidic (such as tomatoes, sauerkraut, and sauces with vinegar or lemon juice) may cause pitting and damage to the porcelain enamel surface and should be wiped up immediately.

We don’t recommend using aluminum foil on the oven bottom. It can affect air flow if the holes are blocked and it can concentrate heat at the bottom of the oven, resulting in poor baking performance.

To clean up spillovers, use soap and water, an abrasive cleaner or soap-filled steel-wool pad. Rinse well to remove any soap before self-cleaning.

Troubleshooting Tips

Customer Service

Oven Shelves

Clean the shelves with an abrasive cleanser or steel wool. After cleaning, rinse the shelves with clean water and dry with a clean cloth.

NOTE: Take the shelves out of the oven before you begin the self-clean cycle.

Control Panel

It’s a good idea to wipe the control panel

Do not use abrasive cleansers, strong liquid

after each use of the oven. Clean with mild

cleaners, plastic scouring pads or oven

soap and water or vinegar and water, rinse

cleaners on the control panel—they will

with clean water and polish dry with a soft

damage the finish. A 50/50 solution of

cloth.

vinegar and hot water works well.

26

Page 26
Image 26
GE JGRP17 owner manual Removable Oven Bottom, Control Panel, Self-clean cycle

JGRP17 specifications

The GE JGRP17 is a cutting-edge gas turbine engine designed primarily for use in industrial applications, distinguishing itself with a blend of advanced technology and robust performance. This engine is part of GE’s extensive portfolio of gas turbine systems, which are renowned for their efficiency, reliability, and adaptability.

One of the main features of the JGRP17 is its high thermal efficiency, enabling it to convert a greater proportion of fuel energy into usable power. This efficiency is achieved through sophisticated aerodynamic design and advanced materials that withstand high temperatures, resulting in lower fuel consumption and reduced emissions. The engine's modular design also contributes to its high performance, allowing for easier maintenance and reduced downtime during repairs or overhauls.

Another notable characteristic of the JGRP17 is its versatility. It can operate on a variety of fuels, including natural gas and liquid fuels, making it suitable for diverse applications across multiple sectors, from power generation to marine propulsion. The engine is engineered to provide reliable operation in various environmental conditions, ensuring consistent performance regardless of location.

The JGRP17 incorporates advanced control systems that enhance its operational efficiency and reliability. These systems utilize real-time monitoring and data analytics to optimize performance and detect potential issues before they escalate, thereby improving overall safety and operational longevity. These smart technologies are complemented by GE's legacy of engineering excellence, resulting in an engine that not only meets current industry standards but also anticipates future demands.

In addition to technical advancements, the GE JGRP17 is designed with sustainability in mind. Its lower emissions profile is a significant advantage in today’s climate-conscious market, facilitating compliance with stringent environmental regulations. The turbine's efficient performance contributes to reduced carbon footprints, making it an attractive option for companies looking to enhance their sustainability practices.

Overall, the GE JGRP17 gas turbine engine exemplifies the convergence of advanced engineering, efficiency, and environmental responsibility. With its powerful performance, flexible fuel options, and commitment to sustainability, it represents a significant advancement in industrial gas turbine technology, positioning itself as a reliable choice for a variety of energy and propulsion applications in an evolving marketplace.