Manuals / GE / Kitchen Appliance / Double Oven

GE JGRP17 Using the self-cleaning oven, Before a Clean Cycle, How to Set the Oven for Cleaning

Models: JGRP17

1 36
Download 36 pages 60.77 Kb
Page 23
Image 23

Using the self-cleaning oven.

The oven door must be closed and all controls set correctly for the cycle to work properly.

Safety

Wipe up heavy soil on the oven bottom.

Before a Clean Cycle

For the first self-clean cycle, we recommend venting your kitchen with an open window or using a ventilation fan or hood.

Remove the shelves, broiler pan, broiler grid, all cookware and any aluminum foil from the oven.

The oven shelves can be self-cleaned, but they will darken, lose their luster and become hard to slide.

Soil on the front frame of the oven and outside the gasket on the door will need to be cleaned by hand. Clean these areas with hot water, soap-filled steel-wool pads or cleansers such as Soft Scrub®. Rinse well with clean water and dry.

Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, replace it.

Wipe up any heavy spillovers on the oven bottom.

Make sure the oven light bulb cover is in place and the oven light is off.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self-cleaning cycle of any oven.

Move birds to another well-ventilated room.

Instructions

Operating

How to Set the Oven for Cleaning

Touch the SELF CLEAN pad.

Touch the HOUR and MIN + or - pads to enter the desired clean time, if a time other than 4 hours is needed.

Clean cycle time is normally 4 hours.

You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty your oven is.

Touch the START pad.

The door locks automatically. The display will show the clean time remaining. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off.

When the LOCKED DOOR light is off, open the door.

The oven shuts off automatically when the clean cycle is complete.

NOTES:

■The words LOCK DOOR will flash and the oven control will signal if you set the clean cycle and forget to close the oven door.

■To stop a clean cycle, touch the

CLEAR/OFF pad. When the LOCKED DOOR light goes off indicating the oven has cooled below the locking temperature, open the door.

Instructions

Troubleshooting Tips

How to Delay the Start of Cleaning

Delay Start is setting the oven to start the clean cycle automatically at a later time than the present time of day.

NOTE: Before beginning, make sure the oven clock shows the correct time of day.

Touch the SELF CLEAN pad.

Touch the HOUR and MIN + or - pads to enter the desired clean time.

Touch the DELAY START pad. The earliest start time you can set will appear in the display.

Touch the HOUR and MIN + or - pads to enter the time of day you want the clean cycle to start.

Touch the START pad.

The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off.

When the LOCKED DOOR light is off, open the door.

NOTE:

■You can find out when the clean cycle will start by touching the DELAY START pad.

Customer Service

23

Page 22 Page 24
Page 23
Image 23
GE JGRP17 owner manual Using the self-cleaning oven, Before a Clean Cycle, How to Set the Oven for Cleaning, Safety
Page 22 Page 24

JGRP17 specifications

The GE JGRP17 is a cutting-edge gas turbine engine designed primarily for use in industrial applications, distinguishing itself with a blend of advanced technology and robust performance. This engine is part of GE’s extensive portfolio of gas turbine systems, which are renowned for their efficiency, reliability, and adaptability.

One of the main features of the JGRP17 is its high thermal efficiency, enabling it to convert a greater proportion of fuel energy into usable power. This efficiency is achieved through sophisticated aerodynamic design and advanced materials that withstand high temperatures, resulting in lower fuel consumption and reduced emissions. The engine's modular design also contributes to its high performance, allowing for easier maintenance and reduced downtime during repairs or overhauls.

Another notable characteristic of the JGRP17 is its versatility. It can operate on a variety of fuels, including natural gas and liquid fuels, making it suitable for diverse applications across multiple sectors, from power generation to marine propulsion. The engine is engineered to provide reliable operation in various environmental conditions, ensuring consistent performance regardless of location.

The JGRP17 incorporates advanced control systems that enhance its operational efficiency and reliability. These systems utilize real-time monitoring and data analytics to optimize performance and detect potential issues before they escalate, thereby improving overall safety and operational longevity. These smart technologies are complemented by GE's legacy of engineering excellence, resulting in an engine that not only meets current industry standards but also anticipates future demands.

In addition to technical advancements, the GE JGRP17 is designed with sustainability in mind. Its lower emissions profile is a significant advantage in today’s climate-conscious market, facilitating compliance with stringent environmental regulations. The turbine's efficient performance contributes to reduced carbon footprints, making it an attractive option for companies looking to enhance their sustainability practices.

Overall, the GE JGRP17 gas turbine engine exemplifies the convergence of advanced engineering, efficiency, and environmental responsibility. With its powerful performance, flexible fuel options, and commitment to sustainability, it represents a significant advancement in industrial gas turbine technology, positioning itself as a reliable choice for a variety of energy and propulsion applications in an evolving marketplace.