GE JGSP28 warranty Installation Instructions INSTALL THE RANGE CONT, Slide Range Into Opening

Installation Instructions

INSTALL THE RANGE (CONT.)

13 SLIDE RANGE INTO OPENING

APosition the range in front of the cabinet opening.

BMake sure that the cooktop edges that overhang the countertop clear the countertop. If necessary, raise the unit by lowering the leveling legs.

CPush while lifting the range into the opening, until the range is within 2″ of engaging the anti-tip bracket.

DRemove the protective trim from the side of the cooktop (if provided).

EUsing the adjustable pliers or wrench, carefully screw in the back leveling leg until the cooktop overhang comes to rest on the countertop.

Adjustable wrench or pliers

FCarefully screw in the front two leveling legs (similar to Step E) until the cooktop overhang touches the countertop.

GCarefully push the range into the opening until the anti-tip bracket engages and the vertical sides are flush with the cabinet.

13SLIDE RANGE INTO OPENING (cont.)

HPlug the range cord into the receptacle. Locate the cord in the back of the range in a manner that it will not touch or be moved by the drawer.

Position range cord so that there is no interference with storage drawer

STORAGE DRAWER

14FINAL CHECK OF ANTI-TIP BRACKET

When installation is complete and the range is in place, check to be sure that the rear leveling leg is fully inserted into the slot of the Anti-Tip Bracket.

Countertop

Cabinet

10