GE JGSP28 warranty Installation Instructions INSTALL THE RANGE, Install The Anti-Tip Bracket

Installation Instructions

INSTALL THE RANGE

12 INSTALL THE ANTI-TIP BRACKET

ALOCATE THE BRACKET

a.Decide whether the bracket will be installed on the right or left side of the range opening.

b.Place the bracket as shown in Fig. 1.

Fig. 1

Adjacent

cabinet Wall

FLOOR-WOOD

Bracket side

Rear

leveling leg

FLOOR-CONCRETE

12INSTALL THE ANTI-TIP BRACKET (cont.)

BINSTALL THE BRACKET IN WOOD OR CONCRETE

INSTALLATION—WOOD CONSTRUCTIONS

a. Locate the centers of the 4 holes identified in Fig. 1 as Floor–Wood and Wall.

b. Drill a 1/8″ pilot hole through the pre-marked areas. Note the angle of the wall screw in Fig. 2.

c. Mount the Anti-Tip bracket with the 4 screws provided.

Top front		Fig. 2
edge of
	25″
countertop
	Bracket	Wall plate
	Screw
	must enter
	wood or
	metal

INSTALLATION—CONCRETE

CONSTRUCTIONS

a. For concrete installation, you will need two 1/4″ x 1-1/2″lag screws and two sleeve anchors.

b. Locate the center of the 4 holes identified in Fig. 1 as Floor—Concrete and Wall. Drill the recommended size holes in each.

c. Install the sleeve anchors into the predrilled concrete holes and install the lag and wall screws through the Anti-Tip bracket. Make sure the screws are securely tightened.

9