Meco 6623S8E641 manual Step Drip Cup Assembly, Cylinder Retainer Wire Assembly

21

Step 24

A. Drip Cup Assembly

Insert the Drip Cup into the hanger wire underneath the grill bowl.

B. Cylinder Retainer Wire Assembly

Position the Cylinder Retainer Wire as shown. Insert the legs of the retainer wire into the holes in the legs just below the joint. Allow wire to drop into position, curve toward the center of the cart and parallel to the floor.

A

B

Step 25

Battery in Igniter Installation

Unscrew Igniter Cover and insert AA Battery with the negative “-“ end going in first. Replace the cover and tighten securely.

Battery

AA1.5v Alkaline

1 pc

This Completes the Grill Assembly.

NOTE: Verify ALL hardware is tightened Securely.