Meco 6623S8E641 manual Step Rear Crossbrace Assembly

9

Step 3

Rear Crossbrace Assembly

Attach Rear Crossbrace inside Rear Leg Frame with 4) 1/4-20 x .39” Bolts. Note: The flanges on the ends of the cross- brace tube are angled inward toward the top to match the angle of the legs.

1/4-20 x .39” Bolt

4 pc

Step 4

Bowl Supports, Cylinder Support and Side Crossbrace Assembly

Attach the Left and Right Bowl Supports, Clyinder Support and Crossbrace to rear leg assembly with 8) 1/4-20 x .39” Bolts. Note: Each part must be oriented as shown for proper assembly. Bolts should be snug but do NOT tighten com- pletely at this stage. Note: The flanges on the ends of the crossbrace tube are angled inward toward the top to match the angle of the legs.

	Rear Leg Assembly
		Right	Side Crossbrace
Left Bowl Support
		Bowl Support
Holes are closest to
OUTSIDE edge

1/4-20 x .39” Bolt

8 pc

Low side of raised area to center

Rear Leg

Assembly Holes in Bowl

Support align

with leg

NOTE:

Threaded Insert on top

Leftand nearest rear legs Bowl Support

NOTE:

notches closest together to outside

Cylinder Support

Rear Leg Assembly