Installation Instructions
C3. ADAPTING MICROWAVE BLOWER FOR RECIRCULATION
1Remove and save the screw that holds the blower motor door closed on the back and the blower retaining screw on the top of the door.
Blower 
Retaining |
| Blower |
|
| |
Screw |
|
|
|
| Blower Motor |
| Back of | Door Retaining |
| Screw | |
| Microwave | |
|
| |
| Oven |
|
2Open the blower door by lifting it up at the back of the microwave oven. Remove and save the blower retaining screw.
Blower Retaining
Screw
3Carefully pull out the blower unit. The wires will extend far enough to allow you to adjust the blower unit.
4Roll the blower unit 90° so that fan blade openings are facing toward the front of the microwave.
BEFORE: Fan Blade
Openings Facing Up 
Roll
AFTER: Fan Blade
Openings Facing
Forward
NOTE: Make sure wires remain routed in the grooves of the motor frame.
20