Installation Instructions

C3. ADAPTING MICROWAVE BLOWER FOR RECIRCULATION (cont.)

5Place the blower unit back into the opening.

CAUTION:Do not pull or stretch the blower unit wiring. Make sure the wires are not pinched.

6Close the blower door. Secure the blower and blower door to the microwave oven using the retaining screws from Steps 1 and 2.

Blower

Blower

Retaining

Screw

 

 

Blower Motor Door

 

Retaining Screw

 

Blower

C4. MOUNT THE MICROWAVE OVEN

CAUTION: FOR EASIER INSTALLATION AND PERSONAL SAFETY, WE RECOMMEND THAT TWO PEOPLE INSTALL THIS MICROWAVE OVEN.

IMPORTANT: Do not grip or use handle during installation.

NOTE: If your cabinet is metal, use the nylon grommet around the power cord hole to prevent cutting of the cord.

NOTE: We recommend using filler blocks if the cabinet front hangs below the cabinet bottom shelf.

IMPORTANT: If filler blocks are not used, case damage may occur from overtightening screws.

NOTE: When mounting the microwave oven, thread power cord through hole in bottom of top cabinet. Keep it tight throughout Steps 1–3. Do

Back of

Retaining Screw

not pinch cord or lift

1 Lift microwave, tilt it

Microwave

Oven

oven by pulling cord.

forward, and hook slots at back bottom edge onto four lower tabs of mounting plate.

2 Rotate front of oven up against cabinet bottom.

21