Installation Instructions
30″ Electric Cooktop
JP340, JP355, JP910, JP930, JP940, JP950
“If you have questions, call 800.GE.CARES or visit our website at:
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•IMPORTANT — Save these
instructions for local inspector’s use.
•IMPORTANT — Observe all governing codes and ordinances.
•Note to Installer – Be sure to leave these instructions with the Consumer.
•Note to Consumer – Keep these instructions for future reference.
•Product failure due to improper installation is not covered under the Warranty.
WARNING — This appliance must be properly grounded.
•ATTENTION INSTALLER —
ALL COOKTOPS MUST BE HARD WIRED (DIRECT WIRED) INTO AN APPROVED JUNCTION BOX. A “PLUG AND RECEPTACLE” IS NOT PERMITTED ON THESE PRODUCTS.
•Proper installation is the responsibility of the installer and product failure due to improper installation is NOT covered under warranty.
MATERIALS YOU WILL NEED
Junction Box | Wire Nuts |
|
TOOLS YOU WILL NEED
Pencil
Saber Saw
Phillips Head
Screwdriver
1/8″ Drill Bit & Electric
or Hand Drill
Ruler or Straightedge
Safety Glasses
PARTS INCLUDED
2 Hold Down
Brackets
4 Screws | Foam Tape |
1 |
