Care and cleaning of the oven.

www.GEAppliances.com

Be sure electrical power is off and all surfaces are cool before cleaning any part of the oven.

Safety

How to Remove Packaging Tape

To assure no damage is done to the finish of the product, the safest way to remove the adhesive left from packaging tape on new appliances is an application of a household liquid dishwashing detergent, mineral oil or cooking oil.

Apply with a soft cloth and allow to soak. Wipe dry and then apply an appliance polish to thoroughly clean and protect the surface.

NOTE: The plastic tape must be removed from all chrome trim. It cannot be removed if it is baked on.

Instructions Operating

The oven door is removable for easier access to the light bulb.

Lift the door straight up and off the hinges.

Do not lift the door by the handle.

Lift-Off Oven Door

To remove the door, open it to the broil stop position. Grasp firmly on each side and lift the door straight up and off the hinges.

Do not place hands between the hinge and the oven door frame.

To replace the door, make sure the hinges are in the broil stop position. Position the slots in the bottom of the door squarely over the hinges and slowly lower it over both hinges.

To clean the inside of the door:

■Soap and water will normally do the job. Heavy spattering or spillovers may require cleaning with a mild abrasive cleaner. Soap-filled scouring pads may also be used.

Do not allow food spills with a high sugar or acid content (such as tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface. They may cause a dull spot even after cleaning.

If necessary, you may use an oven cleaner. Follow the package directions.

■Clean the inside of the oven window with a mild non-scratching cleaner and a damp cloth.

To clean the outside of the door:

■Use soap and water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may also use a glass cleaner to clean the glass on the outside of the door. Do not let water drip into the vent openings.

■Spillage of marinades, fruit juices, tomato sauces and basting materials containing acids may cause discoloration and should be wiped up immediately. When surface is cool, clean and rinse.

■Do not use oven cleaners, cleaning powders or harsh abrasives on the outside of the door.

Instructions Care and Cleaning

Oven Shelves

Clean the oven shelves with an abrasive

After cleaning, rinse the shelves with

cleanser or scouring pad.

clean water and dry with a clean cloth.

Oven Light

Before replacing the bulb, disconnect

Let the bulb cool completely before

electrical power to the oven at the main

removing it. Replace the bulb with a

fuse or circuit breaker panel.

40-watt appliance bulb only. Do not touch

 

a hot bulb with a damp cloth because

 

the bulb will break.

Painted Surfaces

Clean with soap and water or a vinegar and water solution.

Do not use commercial oven cleaners, cleansing

 

powders, scouring pads or harsh abrasives on any

13

painted surface.

 

Troubleshooting Tips Consumer Support

Page 12 Page 14
Page 13
Image 13
GE JRS0624 owner manual Care and cleaning of the oven
Page 12 Page 14

JRS0624 specifications

The GE JRS0624 is a sophisticated and versatile piece of equipment designed to cater to the needs of various industrial applications. This model is particularly recognized for its efficiency and reliability, making it a popular choice among professionals in different sectors. As part of GE’s lineup of high-quality machinery, the JRS0624 encapsulates advanced technologies and features that enhance its operational performance.

One of the standout features of the GE JRS0624 is its robust design, enabling it to endure demanding work environments. Built with durability in mind, this model uses high-grade materials that ensure longevity and reduced wear and tear. Additionally, the equipment is engineered to operate within a wide temperature range, making it suitable for both indoor and outdoor applications.

The GE JRS0624 also incorporates state-of-the-art digital technologies that facilitate seamless integration with existing systems. Its user-friendly interface allows operators to monitor and control functions easily, boosting productivity and operational efficiency. The system supports advanced diagnostics and provides real-time data, enabling users to make informed decisions and carry out maintenance proactively.

Another significant characteristic of the JRS0624 is its energy efficiency. In today’s industrial landscape, reducing energy consumption is paramount, and this model excels in that regard. It is designed to optimize power usage without compromising performance, making it an environmentally friendly choice for businesses aiming to decrease their carbon footprint.

Furthermore, the GE JRS0624 boasts versatility in its applications. It can be utilized for various tasks across multiple industries, ranging from manufacturing to logistics. This adaptability is a key advantage, allowing companies to leverage the equipment for different purposes without investing in multiple specialized machines.

In summary, the GE JRS0624 stands out in the marketplace for its durability, advanced technology, user-friendly operation, energy efficiency, and versatility. As industries continue to evolve, equipment like the JRS0624 is essential for organizations aiming to enhance their operational efficiency and sustainability while maintaining reliability. With its combination of cutting-edge features and robust design, the GE JRS0624 is a worthy investment for any forward-thinking business.
Top Page Image Contents