Instructions

Using the clock and timer.

Not all features are on all models.

Operating Instructions Safety

Make sure the clock is set to the correct time of day.

To Set the Clock

The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a delayed cooking or a delayed self-cleaning cycle.

Touch the TIMER/CLOCK pad twice.

Touch the + or – pad.

If the + or – pad is not touched within one minute after you touch the TIMER/CLOCK pad, the display reverts to

the original setting. If this happens, touch the TIMER/CLOCK pad twice and reenter the time of day.

Touch the START pad until the time of day shows in the display. This enters the time and starts the clock.

To check the time of day when the display is showing other information, simply touch the CLOCK pad. The time of day shows until another pad is touched.

Cleaning

To Turn Off the Clock Display

If you have several clocks in your kitchen, you may wish to turn off the time of day clock display on your oven.

Touch the TIMER/CLOCK pad once to turn off the time of day display. Although you will not be able to see

it, the clock maintains the correct time of day.

Touch the TIMER/CLOCK pad twice to recall the clock display.

Troubleshooting Tips Care and

To Set the Timer

The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.

Touch the TIMER/CLOCK pad.

Touch the + or – pad until the amount of time you want shows in the display. The maximum time that can be entered in minutes is 59. Times more than 59 minutes should be changed to hours and minutes.

The timer is a minute timer only.

The CLEAR/OFF pad does not affect the timer.

If you make a mistake, touch the TIMER/CLOCK pad and begin again.

Touch the START pad. The time will start counting down, although the display does not change until one minute has passed.

When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the TIMER/CLOCK pad is touched.

Consumer Support

To Reset the Timer

If the display is still showing the time remaining, you may change it by touching the TIMER/CLOCK pad, then touching the

+or – pad until the time you want appears in the display.

If the remaining time is not in the display (clock, start time or cooking time are in the display), recall the remaining time by touching the TIMER/CLOCK pad and then touching the + or – pad to enter the new time you want.

To Cancel the Timer

Touch the TIMER/CLOCK pad twice.

8

Page 7 Page 9
Page 8
Image 8
GE JRS0624 owner manual Using the clock and timer, Cleaning
Page 7 Page 9

JRS0624 specifications

The GE JRS0624 is a sophisticated and versatile piece of equipment designed to cater to the needs of various industrial applications. This model is particularly recognized for its efficiency and reliability, making it a popular choice among professionals in different sectors. As part of GE’s lineup of high-quality machinery, the JRS0624 encapsulates advanced technologies and features that enhance its operational performance.

One of the standout features of the GE JRS0624 is its robust design, enabling it to endure demanding work environments. Built with durability in mind, this model uses high-grade materials that ensure longevity and reduced wear and tear. Additionally, the equipment is engineered to operate within a wide temperature range, making it suitable for both indoor and outdoor applications.

The GE JRS0624 also incorporates state-of-the-art digital technologies that facilitate seamless integration with existing systems. Its user-friendly interface allows operators to monitor and control functions easily, boosting productivity and operational efficiency. The system supports advanced diagnostics and provides real-time data, enabling users to make informed decisions and carry out maintenance proactively.

Another significant characteristic of the JRS0624 is its energy efficiency. In today’s industrial landscape, reducing energy consumption is paramount, and this model excels in that regard. It is designed to optimize power usage without compromising performance, making it an environmentally friendly choice for businesses aiming to decrease their carbon footprint.

Furthermore, the GE JRS0624 boasts versatility in its applications. It can be utilized for various tasks across multiple industries, ranging from manufacturing to logistics. This adaptability is a key advantage, allowing companies to leverage the equipment for different purposes without investing in multiple specialized machines.

In summary, the GE JRS0624 stands out in the marketplace for its durability, advanced technology, user-friendly operation, energy efficiency, and versatility. As industries continue to evolve, equipment like the JRS0624 is essential for organizations aiming to enhance their operational efficiency and sustainability while maintaining reliability. With its combination of cutting-edge features and robust design, the GE JRS0624 is a worthy investment for any forward-thinking business.
Top Page Image Contents