www.GEAppliances.com
Tones at the End of a Timed Cycle
Safety
At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is touched. This continuous 6 second beep may be canceled.
To cancel the 6 second beep:
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Touch the BROIL HI/LO pad. The display shows CON BEEP (continuous beep). Touch the BROIL HI/LO pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)
Touch the START pad.
Instructions Operating
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.If you would prefer to have a 24 hour military time clock or
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Touch the TIMER/CLOCK pad once. The display will show 12 hr. If this is the choice you want touch the START pad.
Touch the TIMER/CLOCK pad again to change to the 24 hour military time clock. The display will show 24 hr. If this is the choice you want touch the START pad.
Touch the TIMER/CLOCK pad again to
NOTE: If the clock is in the
Instructions Care and Cleaning
Changing the Speed of the + or – Pads
As you use the + or – pads when setting a time or temperature, you may notice the display changes slowly. This special feature allows you to change the speed. To set the speed you prefer, follow the steps below.
Touch the BAKE and BROIL HI/LO pads at the same time for 3 seconds until the display shows SF.
Touch the + pad. The display will show you a set speed between 1 and 5.
Touch the + pad to increase the speed up to the number 5.
Touch the – pad to decrease the speed down to the number 1.
Touch START to activate the setting and leave the control set in this special features mode.
Troubleshooting Tips Consumer Support
11
