www.GEAppliances.com

The oven door must be closed and all controls must be set correctly for the cycle to work properly.

Safety

How to Delay the Start of Cleaning

Press the SELF CLEAN LO/STD pad once for a 4-hour clean time or twice for a 3-hour clean time.

A 3-hour self-clean time is recommended for use when cleaning small, contained spills. A self-clean time of 4 hours or longer is recommended for a dirtier oven.

If a time other than 4 hours or

3 hours is needed, use the number pads and enter the desired clean time.

You can change the clean time to any time between 3 hours and 5 hours, depending on how dirty your oven is.

Press the DELAY START pad.

Using the number pads, enter the time of day you want the clean cycle to start.

Press the START pad.

The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED light

goes off.

When the LOCKED light goes off, you will be able open the door.

Instructions Operating Instructions Care

After a Clean Cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.

If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with a vinegar and water mixture.

These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, repeat the cycle.

■You cannot set the oven for cooking until the oven is cool enough for the door to unlock.

■While the oven is self-cleaning, you can press the CLOCK pad to display the time of day. To return to the clean countdown, press the SELF CLEAN LO/STD pad.

■If the racks become hard to slide, apply a small amount of cooking oil to a paper towel and wipe the edges of the oven racks with the paper towel.

and Cleaning Troubleshooting Tips Consumer Support

17

Page 16 Page 18
Page 17
Image 17
GE JSP42, JSP47 owner manual After a Clean Cycle, How to Delay the Start of Cleaning
Page 16 Page 18

JSP42, JSP47 specifications

The GE JSP47 and JSP42 are two of the latest advancements in the realm of high-efficiency heat pump water heaters. Designed for both residential and commercial applications, these models embody the perfect combination of efficiency, performance, and user-friendly features.

Starting with the GE JSP47, this model offers a remarkable 47-gallon capacity, suitable for households with varying hot water needs. One of its standout features is its Energy Factor (EF) rating of up to 3.75, which translates to significant energy savings over traditional electric water heaters. The JSP47 utilizes advanced heat pump technology, which extracts heat from the surrounding air and transfers it to the water. This process not only makes the unit extremely energy-efficient but also environmentally friendly, as it minimizes greenhouse gas emissions.

The JSP42, on the other hand, presents a slightly smaller capacity of 42 gallons, making it an excellent choice for smaller homes or those with less demanding hot water requirements. Despite its size, the JSP42 features similar technologies that enhance its efficiency and performance. With an impressive EF rating and a similar heat pump system, both models incorporate smart technology that optimizes performance based on the user's hot water consumption patterns.

Both the JSP47 and JSP42 are equipped with Wi-Fi connectivity, allowing users to monitor and control their water heater remotely through a dedicated smartphone app. This feature enhances convenience and provides real-time data on energy usage, contributing to better energy management and cost savings.

In terms of installation, both models boast a compact design and can be installed in a variety of locations, including garages, basements, and even closets. Furthermore, the units are engineered with noise reduction in mind, significantly minimizing operational noise compared to traditional water heaters.

Safety is a top priority for GE, and both the JSP47 and JSP42 include built-in safety features such as automatic shut-off and leak detection systems. These features work together to provide peace of mind, ensuring that users can trust their hot water supply without concerns for potential hazards.

In summary, the GE JSP47 and JSP42 water heaters are exemplary models that highlight GE’s commitment to cutting-edge technology, energy efficiency, and user comfort. With their advanced features, high energy factor ratings, and smart connectivity options, these heat pump water heaters stand out as ideal solutions for modern residential and commercial hot water needs.
Top Page Image Contents